D-Link DWR-M930 How-To

How to configure the wireless network name (SSID) and
wireless password (WPA Key) on my DWR-M930 4G LTE
1
Connect your PC to the router via an Ethernet cable or connect wirelessly to the dlink-
xxxx (xxxx is the last 4 digits of mac address) from the Wi-Fi list of the device you want
to connect from. When prompted for a password, use the WPA key printed at the bottom
of the router or by pushing the WPS button at the back of the Router.
Note: If you are having trouble connecting the PC wirelessly then try connecting it by
wired connection to one of the LAN ports on the back of the LTE Router.
Access the router's web interface by entering its IP address into a web browser on the
2
address bar http://192.168.0.1
3 The page will be prompted to enter a username and password. The default username
and the default password are:
Username: admin
Password: (as printed on the device label bottom of the router)
Note: If you have changed the password and cannot remember it, you will need to reset
the router to factory
Once login, Click on the 'Wireless' tab at the top of the page then 'Basic Settings'
4
Technical Support Setup Procedure
Router?
then press enter.
defaults.