D-Link DWR-M930DS Technical Support Setup Procedure

How to install 4g dual sim lte router

Download this manual

How to install DWR-M930DS 4G Dual SIM LTE Router

The SIM card slot is on the back, follow the slot's diagram. Insert the nano SIM card

carefully, ensure the gold contacts are facing down, and then push to lock it. (SIM 1 Active,

SIM 2 Backup)

Note: If the SIM is not in the device, not detected, or if no internet, the Globe LED (Red)

will be displayed in front of the device.

Connect the DWR-M930DS to a power source using the included adapter. Press the

power button until the device turns on.

Connect to your DWR-M930DS to either Wi-Fi or Ethernet using a laptop, computer, or

smart phone). The default Wi-Fi network name (SSID) is D-LINK2G-XXXX, with the

password printed on the back of your router.

Once connected, open a web browser and type in the address bar

https://dlinkrouter.local

Note: In case you get a "Privacy Error", click Advanced. Then, click Continue to

192.168.0.1 (unsafe) to proceed

Technical Support Setup Procedure

https://192.168.0.1

Need help?

Do you have a question about the DWR-M930DS and is the answer not in the manual?

Page 1 Connect the DWR-M930DS to a power source using the included adapter. Press the power button until the device turns on. Connect to your DWR-M930DS to either Wi-Fi or Ethernet using a laptop, computer, or smart phone). The default Wi-Fi network name (SSID) is D-LINK2G-XXXX, with the password printed on the back of your router.
Page 2 Note: If you have changed the password and cannot remember it, you will need to reset the router to factory defaults. Once logged in, you should see the DWR-M930DS’s web-based management interface. You will see a Signal indicator, Network Status: Connected and the WAN IP address indicates that the router is connected Note: Typically, routers automatically recognize the connection upon inserting the SIM card.
Page 3 Technical Support Setup Procedure To manually configure the APN settings, navigate through the LTE tab, and then click on Basic Settings from the left-hand menu. Enter the APN as required, then click Save & Apply. Remember to have the correct APN information, usually provided by your SIM card provider.