Related Manuals for ActronAir GW100K
Summary of Contents for ActronAir GW100K
- Page 1 BMS Gateway Controller Installation and Commissioning Guide GW100K IMPORTANT NOTE: Please read this manual carefully before installing the Gateway on to the Building Management System.
-
Page 2: Table Of Contents
09.01. Restoring the Default values of the BMS Gateway ............24 09.02. Link to the Register Table ....................24 ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 3: Introduction
This will allow air-cooled packaged units and split ducted systems to be controlled by Building Management Systems (BMS). The procedures outlined in this manual are provided to correctly and safely install the ActronAir Gateway kit to control appropriate ActronAir Air Conditioner units. -
Page 4: Parts Included In The Bms Gateway Controller Kit (Gw100K)
ICUNO-MOD needs to be purchased separately. One ICUNO-MOD controller will be needed for every system connected to the BMS Gateway ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 5: Bms Gateway (Gw100)
GROUP CONTROL INSTALLATION AND COMMISSIONING GUIDE 03. BMS Gateway (GW100) The BMS Gateway (GW100) is a microprocessor-based controller designed to connect up to 10 ActronAir ICUNO- MOD compatible systems. It translates Modbus RS485 output from these systems into BACnet/IP, BACnet MS/TP, or Modbus TCP/IP, enabling communication with a Building Management System (BMS). - Page 6 Fieldbus port RS485 GND TxL/RxL Ethernet Port ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. BMS Gateway Control Installation and Commissioning Guide Ver 01 250213...
-
Page 7: Mounting And Dimensions
Tensione di alimentazione del prodotto LEGENDA 24 Vac +10%/-15% 50/60 Hz, 28 to 36 ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 8: Electrical Installation
Storage: -40 To 90 °C, 90% RH non-condensing Operation: -40 To 90 °C, 90% RH non-condensing ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 9: Network Communications
Max 2 Important: • The universal inputs/outputs cannot be used as digital outputs. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 10: Digital Outputs
Class A Do not touch or tamper with the device when powered. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 11: Connection Diagram
Ports available for this are Ethernet or RS485. However, only one port can be used and set as the network connection at a time. RS485 Ethernet ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. Page 11 of 25... -
Page 12: Maximum Cable Length
Serial Address Baud Rate 19200 ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. BMS Gateway Control Installation and Commissioning Guide Ver 01 250213... -
Page 13: Installation And Configuration Bms Gateway
Press Esc ( ) to go back to main screen. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 14: Complete Programming Menu Tree
Additional Integer Variables Subsequent screens are replicated for Device 02-10: Ae02A - Ae10A, Ae02D - Ae10D, Ae02I - Ae10I ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. - Page 15 Enter to logout Enter to logout of that user access ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. BMS Gateway Control Installation and Commissioning Guide Ver 01 250213...
-
Page 16: Screens Available
) or Down( ) arrows to navigate through the devices, as shown below: ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 17: Login Screen
If you are logged in under USER and try to access a SERVICE restricted menu, it will be disallowed. You will need to log out as USER and log back in using the SERVICE password. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. -
Page 18: Logout Screen
Indoor Coil Temperature – ICUNO-MOD register 1301 – R ead only OD Firmware – ICUNO-MOD register 1001 – Read only ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. -
Page 19: Information Menu
NOTE Ask for Actron Technical Support for further assistance on this. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. - Page 20 NOTE These values must correspond with the configuration of all connected ICUNO-MOD cards. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd.
- Page 21 If Ethernet is selected, J3 can be used to plug a CP05 or a CP10 terminal display. Changing the Port selection requires the BMS gateway to be rebooted to take effect. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice.
- Page 22 If RS485 is selected, J3 can only be used for BACnet MS/TP and a display terminal cannot be connected. Changing the Port selection requires the BMS gateway to be rebooted to take effect. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice.
- Page 23 NOTE The Net configuration menu is only visible when the BACnet port is set to Ethernet in menu Bc02 ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd.
-
Page 24: Troubleshooting
2. QR Once link is accessed, chose either View or Download the register table. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject 9590-3038 to change without notice. Copyright © 2025 Actron Engineering Pty. Ltd. - Page 25 No.: AU06394 ©Copyright 2025 Actron Engineering Pty Limited ABN 34 002767240. ®Registered Trade Marks of Actron Engineering Pty Limited. ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change without notice. 9590-3038...
Need help?
Do you have a question about the GW100K and is the answer not in the manual?
Questions and answers