Garmin VARIA VUE Owner's Manual page 20

Light Network Settings
From the Sensors menu, select Lights, and select a paired light.
NOTE: Not all settings are available for all Edge bike computers.
Sensor ID: Displays the sensor's identification number.
Connection Type: Displays the technology that is used to connect to the sensor.
About: Displays device and software information.
Camera Settings: Sets the video resolution and recording mode, turns off audio recording, turns on image
stabilization, and more.
Light Mode: Sets the light intensity and pattern mode, or turns off the light.
NOTE: This setting is available when you select the Individual light mode setting
page 16).
Remove: Allows you to delete a paired light from the network.
Light Mode Settings
From the Sensors menu, select Lights > Network Options > Light Mode.
Auto: Automatically adjusts the light intensity and light mode based on the ambient light and time of day. This
mode is recommended for commuting or road rides.
High Visibility: Sets the light intensity to flash mode or the brightest setting available.
Trail: Automatically adjusts the light intensity and light mode based on the ambient light and time of day. This
mode is recommended for trail riding.
Individual: Allows you to customize the light intensity and pattern mode for each light in your network
Network Settings, page 16).
Testing the Light Network
1 From the Sensors menu, select Lights > Network Options > Test Lights.
2 Select a light to test.
The light blinks when it is connected.
Automatic Beam Intensity
When paired with a compatible Edge bike computer, the headlight can adjust automatically based on the current
lighting conditions, sunrise and sunset information, and speed.
As your speed increases, the headlight shines brighter. At lower speeds, the light intensity is reduced to
maximize battery life.
16
(Light Mode Settings,
(Light
Edge Bike Computer Settings