Garmin VARIA VUE Owner's Manual page 11

Device Status LED
LED Activity
Single flashing
Single flashing
Double flashing
Rapidly flashing
Solid
Alternating
Alternating
Double flashing
Single flashing
Slowly flashing
Camera Status LED
LED State
Solid
Flashing
Slowly flashing
Solid
Slowly flashing
Slowly flashing
Introduction
Status
The device is in pairing mode. The device is in pairing mode for 5 minutes
or until you press the device button.
The battery level is good, and the device is in smart mode.
NOTE: In smart mode, ANT+
technology is turned off.
The battery level is good, and the device is in active mode. The device can
be controlled by a paired compatible Garmin device, or a phone connected
with the Varia app.
NOTE: In active mode, both ANT+ technology and Bluetooth technology
are turned on.
The battery is charging. As the charge increases, the flash period
increases until it is fully charged.
The battery is fully charged.
The device is updating software
page 28).
The device is uploading videos to Garmin Vault
The battery level is low with approximately 60 or fewer minutes of battery
life remaining, and the device is in active mode.
The battery level is low with approximately 60 or fewer minutes of battery
life remaining, and the device is in smart mode.
An error occurred. You may need to reset the device
page 26).
Status
The device is recording video to the video loop. New video overwrites old
video.
The device is saving a video or photo. This locks the file, preventing it from
being overwritten.
There is a problem with the memory card.
The memory card is being formatted.
The device is in mass storage mode.
The device is powering on.
The device is accessing the memory card.
The device is in Wi‑Fi sharing mode.
®
technology is turned on, and Bluetooth
®
(Device Status LED for Software Updates,
(Vault Storage,
®
page 20).
(Resetting the Device,
7