Garmin VARIA VUE Owner's Manual page 17

Camera Settings
The accuracy of the speed overlay depends on a number of factors, including GPS accuracy of the connected
display, rider speed, and wireless connectivity between the display and the device.
From the Varia app, select the device icon at the top of the home screen, and select Camera Configuration.
Recording Mode: Sets the recording mode for the video camera, or turns off video recording
Recording Mode, page 13).
Video Quality & Audio: Allows you to select the video resolution
also enable electronic image stabilization (EIS)
audio recording (Turning Audio Recording Off,
Live Camera Preview: Allows you to see the camera view for optimal placement on your bike.
Incident Recording: Turns on and off incident recording
Data Overlays: Sets the type of data that appears on videos and photos.
NOTE: GPS and speed overlays require an open connection between the Varia Vue and the display. An open
connection between a sensor and display is not encrypted or authenticated.
Changing Your Recording Mode
1 From the Varia app, select the device icon at the top of the home screen.
2 Select Camera Configuration > Recording Mode.
3 Select an option:
• Select Continuous to turn on camera recording when the device turns on.
• Select On Radar Activity to record video only when a compatible radar device radar that is connected to
the app detects a vehicle.
NOTE: If no radar device is connected, your camera will continuously record in this mode.
• Select Off to disable camera recording.
Video Resolution Settings
You can set the resolution of video recorded by the camera.
Resolution is the width and height of the video in pixels. FPS is the number of video frames captured each
second. Settings with a higher resolution or FPS require more memory card space.
In the Varia app, select the device icon at the top of the home screen, and select Camera Configuration > Video
Quality & Audio.
Setting
4K, 30 fps
1440p, 30 fps
1080p, 30 fps
1080p, 60 fps
Turning Video Stabilization On
You can turn on electronic image stabilization (EIS) to reduce shaky video.
1 From the Varia app, select the device icon at the top of the home screen.
2 Select Camera Configuration > Video Quality & Audio.
3 Select the Stabilize Video toggle switch.
The Varia App
page 14).
Resolution with Electronic Image Stabilization (EIS)
2688 x 2160 px (3840 x 2160 px without EIS)
2560 × 1440 px
1920 × 1080 px
1920 × 1080 px
NOTICE
(Video Resolution Settings,
(Turning Video Stabilization On,
(About Incident Recording,
(Changing Your
page 13). You can
page 13), and turn on and off
page 8).
13