Your License Plate above the license plate on your When the mount is installed on your vehicle, you can configure the mount vehicle, the Garmin logo on the camera ® for installation below the license plate clip must be right-side up. Out of the box, (page 2).
Insert a AA battery into each end of the camera, with the positive pole facing outward. Rotate the camera clip 180 degrees, so the Garmin logo is facing right- side-up. On each battery cover, verify the gasket is clean and fully seated in Insert the two camera clip screws into the groove.
Viewing the Backup Camera After you pair your camera with a compatible Garmin navigation device, the camera view appears automatically when you turn on your navigation device, and Press the other side into the mount you can manually show the camera at any until it clicks.
Tighten the adjustment screws to lock the mount in the new position. Install the camera into the mount. View the camera using your Garmin navigation device (page 4), and verify the camera angle. When the camera is angled correctly,...
Specifications Battery Type 2 removable AA. Lithium recommended. Camera and IEC 60529 IPX6/7 transmitter waterproof rating Operating From -20° to 70°C temperature (from -4° to 158°F) range Wireless Wi‑Fi 2.4 GHz @ ® frequencies/ +13dBm nominal protocols Bluetooth 2.4 GHz ®...