Devon IT OptiPlex VDI Blaster Edition Administration Manual page 61

NOTE: You may use a hostname or IP address. Examples:
ftp://myServerName/path/to/my/image/<name of dell disk
image> and nfs://192.168.1.123/path/to/my/image/<name of
dell disk image>.

Username-If required, enter the username of an account that has
permissions to read & write to the image repository you specified in the
Image Location field above.

Password-If required, enter the password needed for the Username
specified above.

Configuration File-Either click Browse to select a Config file on your
local machine or uncheck the box to fill the following fields:
4 Click the OK button to add this disk image.
You will receive a Success message. In the Disk Image Inventory
5
table you will now see your recently added disk image. See section titled,
"Applying a Disk Image to a Terminal," for instructions on how to apply
the disk image to your thin clients.

Model-Enter the model name associated with this image*.

Operating System-Enter DeTOS or WES Operating System.
Thin Client Management | 61