Devon IT OptiPlex VDI Blaster Edition Administration Manual page 43

4
In the list of modules, select which settings module you want to apply.
To select multiple modules, hold down the <Ctrl > key while clicking
other module names, or use the <Shift> key to select a range of modules.
You must select at least one module – even if it is the only one available.
5
Click the OK button to apply these settings to your terminal. You
receive a Success message once they have been applied.
NOTE: To verify that your settings are properly applied to your terminal, use Echo's
Shadowing feature to gain access to the terminal's screen and inspect the system's new
settings.
Thin Client Management | 43