Devon IT OptiPlex VDI Blaster Edition Administration Manual page 39

Applying Connections to a Thin Client
1
From the table of inventoried Terminals, right-click the terminal you
want to apply settings to. Select Connections->Apply to Terminal.
2
In the list of Connections, select which connections you want to apply.
To select multiple connections, hold down the <Ctrl> key while clicking
other names, or use the <Shift> key to select a range of connections.
You must select at least one connection – even if it is the only one
available.
3
Click the OK button. You will receive a Success message when the
connection is complete.
Thin Client Management | 39