Echo Network Configuration - Devon IT OptiPlex VDI Blaster Edition Administration Manual

5 The next menu allows you to set the time zone for the Echo Virtual
Appliance. Select your geographic area from the list and press <Enter>.
6
A list of cities will appear. Select a nearby city located in your time zone
and press <Enter>.

Echo Network Configuration

DHCP Configuration (Default)
The next screen is the Networking configuration menu. By default, Echo will attempt
to automatically acquire an IP Address from the Dynamic Host Configuration Protocol
(DHCP) on your network. This means that your IP address will be automatically
assigned every time you reboot the machine and restart your Echo virtual application. If
DHCP assigned your Echo an IP address properly, the fourth option will read Change
eth0 inet dhcp <ip-address> <subnet mask>. Otherwise the line will just show Change
eth0 inet dhcp and you will need to assign a static IP address to the appliance.
Virtual Appliance Installation & Setup | 17