Devon IT OptiPlex VDI Blaster Edition Administration Manual page 19

Editing DNS for Static IP Configuration
When using a static address, you need to edit the Echo server's resolv.conf file.
This file contains the IP address to your DNS server(s) as well as domain search
paths.
1
From the main menu, select Reconfigure Networks.
2
Select DNS view/editresolv.conf.
3
Using the editor, make sure your file contains at least the following two
lines: search <domain> and namesever <ip address>
Where <domain> is your domain name and <ip address> is the
IP address of your DNS server.
Add more nameserver <ip address> lines as needed for each
4
additional DNS server you want to include.
5
Press <Control><X>, then Y to save changes, and then press Enter to
save the file.
Select No changes to return to the Main Menu.
6
Virtual Appliance Installation & Setup | 19