FireClass FC700 Series Short User Manual

FIRECLASS FC700 Series Fire detection system
FIRECLASS FC700 Series Panels - Short User Guide
Introduction
This short user guide provides essential information to help you to use the features of the FIRECLASS FC700 Series
of panels. The guide provides a general overview of the panel's Graphical User Interface (GUI), its menu icons, and
functions.
Menu Icon Functional Description
Login is required before you can access
Login
most of the panel's menu icons and other
functions. There are three different access
options, which you can use to access the
panel's menu icons:
1 Software login
2 Key based software login
3 RFID (Radio Frequency Identification)
access card login.
The System Status icon allows you to check
for disablements and faults on all connected
devices to the panel by:
System
Status

point
 function

zone
The EventLog icon allows you to examine
the current status and the history of the sys-
tem. You can also download event log files
Event Log
on to a USB memory stick and print them
from your PC.
The Panel Test icon allows you to check that
the system controls and interfaces are func-
tioning correctly by testing the following:
Panel
Test
 display unit

LEDs

buzzer
Table 1: Menu Icons and Functions
Short User Guide Doc. version 1.0
www.acornfiresecurity.com
FIRECLASS FC700 Series Panels - Short User Guide
How to use the Icon
Main Menu
For example, to log in using access option one:
Touch the Login button
and 'User Password'
in.
For example, to view system status 'By Function':
Touch the System Status icon
Function icon
the required Zone

Select the required Points
to view the system status.
NOTE: Swipe your finger to the left or to the right to
For example, to view the status of a fault:
Touch the Event Log icon

icon
display the event log status.
NOTE: Swipe your finger to the left or to the right to
Tasks
Touch the Panel Test icon (wait for the tests to
complete)
completed.
NOTE: The window closes automatically after 10
seconds.
www.acornfiresecurity.com
 Enter your 'User I.D'
 Touch the OK button to log

Select the required panel

Select the required Functions

Touch View Status
view all screens. Alternatively, use the scroll
bars.
 Select the Status
Select Fault as the status
see if there are more events in the log. Alter-
natively, use the scroll bars.

Close the window after the test has

Touch the By

Select
 Touch View to
1/4