Creating A Bootable Device; Supported Usb Flash Media Device - Compaq dc5800 - Microtower PC Reference Manual

Service reference guide: hp compaq dc5800 business pc
Hide thumbs Also See for dc5800 - Microtower PC:
Table of Contents

Advertisement

NOTE:
A bootable diskette is required for this procedure or to create a bootable USB flash media
device. If Windows XP is not available to use to create a bootable diskette, use the method for copying
to a single computer instead (see
1.
Create a bootable diskette or USB flash media device. See
on page 34
CAUTION:
order in the Computer Setup (F10) Utility lists the USB device before the hard drive, the computer
can be booted from a USB flash media device. Otherwise, a bootable diskette must be used.
2.
Select a setup configuration to copy. Turn off the computer. If you are in Windows, click Start >
Shut Down > Shut Down.
3.
If you are using a USB flash media device, insert it now.
4.
Turn on the computer.
5.
As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press
F10
6.
If you are using a diskette, insert it now.
7.
Click File > Replicated Setup > Save to Removable Media. Follow the instructions on the screen
to create the configuration diskette or USB flash media device.
8.
Download a BIOS utility for replicating setup (repset.exe) and copy it onto the configuration diskette
or USB flash media device. To obtain this utility, go to
support.html
9.
On the configuration diskette or USB flash media device, create an autoexec.bat file containing the
following command:
repset.exe
10.
Turn off the computer to be configured. Insert the configuration diskette or USB flash media device
and turn the computer on. The configuration utility will run automatically.
11.
Restart the computer when the configuration is complete.

Creating a Bootable Device

Supported USB Flash Media Device

Supported devices have a preinstalled image to simplify the process of making them bootable. All HP
or Compaq and most other USB flash media devices have this preinstalled image. If the USB flash media
device being used does not have this image, use the procedure later in this section (see
USB Flash Media Device on page
34
Chapter 4 Desktop Management
Copying to Single Computer on page
or
Unsupported USB Flash Media Device on page
Not all computers can be booted from a USB flash media device. If the default boot
Enter
to bypass the title screen, if necessary.
If you do not press
F10
when the monitor light turns green to access the utility.
and enter the model number of the computer.
36).
F10
when the monitor light turns green to enter
at the appropriate time, you must restart the computer and again
http://welcome.hp.com/country/us/en/
33).
Supported USB Flash Media Device
36.
Unsupported

Advertisement

Table of Contents
loading

Table of Contents