Computer Setup-Security - Compaq dc5800 - Microtower PC Reference Manual

Service reference guide: hp compaq dc5800 business pc
Hide thumbs Also See for dc5800 - Microtower PC:
Table of Contents

Advertisement

Computer Setup—Security
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-4
Computer Setup—Security
Option
Setup Password
Power-On Password
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Smart Cover (some
models)
Device Security
8
Chapter 2 Computer Setup (F10) Utility
Description
Allows you to set and enable setup (administrator) password.
NOTE:
If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
See the Troubleshooting Guide for more information.
Allows you to set and enable power-on password. The power-on password prompt appears after a
power cycle. If the user does not enter the correct power-on password, the unit will not boot.
NOTE:
This password does not appear on warm boots , such as
Windows, unless enabled in Password Options, below.
See the Troubleshooting Guide for more information.
Allows you to:
Lock legacy resources (appears if a setup password is set)
Enable/disable network server mode (appears if a power-on password is set)
Specify whether the password is required for warm boot (Ctrl+Alt+Delete) (appears if a power-
on password is set)
Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but
not changing, the F10 Setup Options without entering setup password)
See the Desktop Management Guide for more information.
Allows you to:
Lock/unlock the Cover Lock.
Set the Cover Removal Sensor to Disable/Notify User/Setup Password.
NOTE:
Notify User alerts the user that the sensor has detected that the cover has been
removed. Setup Password requires that the setup password be entered to boot the computer if the
sensor detects that the cover has been removed.
This feature is supported on some models only. See the Desktop Management Guide for more
information.
Allows you to set Device Available/Device Hidden for
Serial ports
Parallel port
Front USB ports
Rear USB ports
Internal USB ports
System audio
Network controllers (some models)
Ctrl+Alt+Delete
or Restart from

Advertisement

Table of Contents
loading

Table of Contents