Hard Drive; Dvd Drive; Video Test; Pointing Device - Compaq Presario 2510 Maintenance & Service Manual

Home | Preface
Jumpers & Switches
Diagnostic Error Codes
Modem
Error
Description
Code
1201-xx Modem Internal Loop-Back Test
1202-xx Modem Time-Out Error
1203-xx Modem External Termination Test
1204-xx Modem Auto Originate Test
1206-xx Dial Multifrequency Tone Test
1210-xx Modem Direct Connect Test
Back to List
Diagnostic Error Codes

Hard Drive

Error
Description
Code
1700-xx Hard drive ID types test failed
1701-xx Hard drive format test failed
1702-xx Hard drive read test failed
1703-xx Hard drive write/read/compare
test failed
1704-xx Hard drive random seek test
failed
1705-xx Hard drive controller test failed
1706-xx Hard drive ready test failed
1707-xx Hard drive recalibration test
failed
1708-xx Hard drive format bad track test
failed
1709-xx Hard drive reset controller test
failed
1710-xx Hard drive park head test failed
1714-xx Hard drive file write test failed
1715-xx Hard drive head select test failed
1716-xx Hard drive conditional format
test failed
1717-xx Hard drive ECC* test failed
1719-xx Hard drive power mode test
failed
1730-x Fixed Disk 0 does not support
DMA Mode
1731-x Fixed Disk 1 does not support
DMA Mode
1740-x Fixed Disk 0 failed Set Block
Mode command
1741-x Fixed Disk 1 failed Set Block
Mode command
1750-x Fixed Disk 0 failed Identify
command
1751-x Fixed Disk 1 failed Identify
command
1760-x Fixed Disk 0 does not support
Block Mode
1761-x Fixed Disk 1 does not support
Block Mode
1790-x Disk 0 Configuration Error
1792-x Secondary Disk Controller Failure
1799-xx Invalid hard drive type failed
Back to List
Diagnostic Error Codes

DVD Drive

Error
Description
Code
3301-xx DVD drive read test failed
3305-xx
66XX-xx
* Boot to DOS (Command Prompt only) or Windows (Not Safe Mode). Press the DVD drive
eject button (located on the front bezel) to eject the CD and retest.
Back to List
Diagnostic Error Codes

Video Test

Error
Description
Code
2402-xx Video memory test failed
2403-xx Video attribute test failed
2404-xx Video character set test failed 2. Replace the system board and retest.
2405-xx Video 80 × 25 mode 9 × 14
character cell test failed
2406-xx Video 80 × 25 mode 8 × 8
character cell test failed
2407-xx Video 40 × 25 mode test
failed
2408-xx Video 320 × 200 mode color
set 0 test failed
2409-xx Video 320 × 200 mode color
set 1 test failed
2410-xx Video 640 × 200 mode test
failed
2411-xx Video screen memory page
test failed
2412-xx Video gray scale test failed
2414-xx Video white screen test failed
2416-xx Video noise pattern test failed The following steps apply to error codes 2402-xx
2418-xx ECG/VGC memory test failed
2419-xx ECG/VGC ROM checksum test
failed
2420-xx ECG/VGC attribute test failed
2421-xx ECG/VGC 640 × 200 graphics
mode test failed
2422-xx ECG/VGC 640 × 350 16-color
set test failed
2423-xx ECG/VGC 640 × 350 64-color
set test failed
2424-xx ECG/VGC monochrome text
mode test failed
2425-xx 640 × 480 graphics test
failure
2431-xx 640 × 480 graphics test
failure
2432-xx 320 × 200 graphics (256-
color mode) test failed
2448-xx Advanced VGA Controller test
failed
2451-xx 132-column Advance VGA
test failed
2456-xx Advanced VGA 256-Color test
failed
2468-xx Advanced VGA BitBLT test
2477-xx Advanced VGA datapath test
2478-xx Advanced VGA BitBLT test
2480-xx Advanced VGA Linedraw test
Back to List
Diagnostic Error Codes

Pointing Device

Error
Description
Code
8601-xx Pointing Device Interface test
failed
Back to List
Diagnostic Error Codes
Audio
Error
Description
Code
3206-xx Audio System Internal Error Replace the system board and retest.
Back to List
Diagnostic Error Codes
CD Drive
Error
Description
Code
3301-xx CD drive read test failed
3305-xx
66XX-xx
Back to List
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
| Product Description
Removal & Replacement
| Specifications
Modem Test Error Codes
Hard Drive Test Error Codes
DVD Drive Error Test Cods
Video Test Error Codes
Pointing Device Test Error Codes
Audio Test Error Codes
CD Drive Test Error Codes
| Troubleshooting
| Connector Pins
Recommended Action
The following steps apply to error codes 1201-
xx through 1210-xx:
1. Refer to modem documentation for correct
Setup procedures.
2. Check the modem line.
3. Replace the modem and retest.
Recommended Action
The following steps apply to error codes 1700-xx
through 1799-xx:
1. Run Setup and verify drive type.
2. Replace the hard drive signal and power cables
and retest.
3. Replace the hard drive and retest.
4. Replace the system board and retest.
Recommended Action
The following steps apply to error codes 3301-xx
through 3305-xx and 66XX-xx:
1. Replace the DVD drive and retest.*
2. Check the jumper settings on the DVD drive.
3. Check and/or replace the power and signal cables
and retest.
4. Ensure no DVD disk is inserted when running the
CD Drive tests. This will result in a 66xx error. This
is a test issue, not a CD drive issue .
Recommended Action
The following steps apply to error codes 2402-xx
through 2456-xx:
1. Run Setup.
through 2456-xx:
1. Run Setup.
2. Replace the system board and retest.
The following steps apply to error codes 2468-xx
through 2480-xx:
1. Run Setup.
2. Replace the system board and retest.
Recommended Action
1. Replace with a working pointing device and
retest.
2. Replace the system board and retest.
Recommended Action
Recommended Action
The following steps apply to error codes 3301-xx
through 3305-xx and 66XX-xx:
1. Replace the CD and retest.
2. Check the jumper settings on the CD drive.
3. Check and/or replace the power and signal
cables and retest.
4. Replace the CD drive and retest.
| Illustrated Parts
| Power Cord Requirements
|