KVM
EXTENDER
DC-51102-LOCAL
USER MANUAL
Package Contents
KVM Extender Local Unit
KVM Extender Remote Unit
User manual
Power adapter DC 9V/600mA
3-in-1 cable
If any thing missed, please contact with your vendor.
Features
The extension of VGA, PS/2 keyboard, PS/2 mouse
signal up to 180 meter away by using the KVM
Extender and one CAT5 cable.
High VGA resolution up to 1280x1024.
Support Auto/Manual video quality adjustment.
Support video gain and equalization adjust.
Support 3 hot key to combine other equipment.
Two control privilege modes – "Share" & "Local only".
Extra console port is available on Local side.
Auto console selection between Local and Remote.
Specifications
Function
PC Connector
Monitor Connector
Keyboard Connector
Mouse Connector
Mode Switch Button
RJ-45 Connector
LEDs
Video Resolution
Cable Distance
Power Adapter
DC-51102-REMOTE
Housing
Weight
Dimensions(LxWxH)
V1.0
Hardware Requirements
Console
x 1
PC
x 1
x 1
Cable
x 2
x 1
DC-51102-LOCAL FRONT VIEW
No
Component
CAT.5
1
Connector
2
Power LED
3
Link LED
Mode SW
4
Button
5
PS/2 Mouse
6
PS/2 Keyboard
DC-51102-LOCAL
DC-51102-REMOTE
1 x HD-15 Female
(VGA / KB / MS)
1 x HD-15 Female
1 x 6 pin mini-DIN Female (PS/2)
1 x 6 pin mini-DIN Female (PS/2)
1
1
Power
1
Link
1
1280×1024@60HZ
180 m (Max.)
DC 9V 600mA
Aluminum
235 g
130x83.5x29.5 mm
Required specifications
1 x Highest resolution monitor.
1 x PS/2 mouse.
1 x PS/2 keyboard.
1 x VGA, SVGA or Multisync card.
1 x 6-pin mini-DIN (PS/2) mouse port.
1 x 6-pin mini-DIN (PS/2) keyboard port.
1 x 3-in-1 KVM cable or equivalent.
Description
Plugs the CAT5 cable into this
connector.
On when the unit power on.
Off when the unit has no power.
Flash when "Local Using only".
On when links successfully.
Off when no link to Remote unit.
Flash when Remote using.
Toggle the mode switch between
"Share" & "Local only"
The PS/2 Mouse plugs here.
The PS/2 Keyboard plugs here.
DC-51102-LOCAL REAR VIEW
None
No
Component
None
1
Power Jack
Monitor
2
Connector
3
PC Connector
DC-51102-REMOTE FRONT VIEW
230 g
No
Component
CAT.5
1
Connector
2
Power LED
3
Link LED
4
PS/2 Mouse
5
PS/2 Keyboard
DC-51102-REMOTE REAR VIEW
No
Component
1
Power Jack
Monitor
2
Connector
*
P.S. Power and Link LED flash simultaneously when
KVM-E is in the "command mode".
Description
The power adaptor plugs here.
The VGA cable (HD-15) connects
to the monitor plugs in here.
The 3-in-1 cable to PC plugs here.
Description
Plugs the CAT5 cable into this
connector.
On when the unit power on.
Off when the unit has no power.
Flash when "Local Using only".
On when links successfully.
Off when no link to Local unit.
Flash when Local Using.
The PS/2 Mouse plugs here.
The PS/2 Keyboard plugs here.
Description
The power adaptor plugs in here.
The VGA cable (HD-15) connects
to the monitor plugs in here.
Need help?
Do you have a question about the DC-51102-LOCAL and is the answer not in the manual?
Questions and answers