Extron electronics DMP 64 Plus C V AT Setup Manual page 15

Extron Certified DSP Bundle for Microsoft
Guide
Configure or Program the Control Processor
Introduction to Global Configurator
NOTE: See the Global Configurator Plus and Professional Help File as needed for step-by-step instructions and detailed
information. The help file for GCP includes an introduction to the software and how to start a project and configuration.
Use Global Configurator to configure the control processor. The configuration tells the control processor:
• How its ports function
• How to control other products
•
Whom to notify, how, and under what circumstances
Configuration with GC Plus
1. Open provided GC Plus configuration file
Software opens to Configuration view (
Figure 26. Configuration View — System Settings page for Control Processor
2.
Set the IP address (see figure 26,
NOTES:
• The factory configured passwords for all accounts on a device are set to the device serial number. Passwords are
case sensitive.
• If the device is reset to default settings, the password is the default password configuration. The default password is
extron.
3. Open the Communications Ports page (
Teams
®
•
•
). This option is also selectable from the View menu.
) and Admin password (
1 2
).
3
Rooms – Medium Room • Setup
®
How its ports function
When to do things
) of IPCP Pro Control Processor.
15