Shimadzu SPD-M30A Quick Manual page 5

4
Setting the SPD-M20A
■ Setting the IP address of SPD-M20A
Connect to SPD-M20A using Internet Explorer to change
the IP address.
1) Open the setting screen from IE.
Input "http://192.168.200.98" when newly installed.
2) Log in as Administrator.
Input user ID and password, and press down the
Login button. When newly installed, input User ID:
administrator and Password: pdaadmin.
3) Change the IP address and Subnet mask
Click on the Edit button of the Administrator Setting
window.
Input IP address and Subnet mask from the Network
Setup window.
After input, click on the OK button.
4) Restart SPD-M20A.
The changed IP address becomes valid from the next
time SPD-M20A starts up.
■ Setting Group name and Master name
When starting analysis synchronously with the
CBM-20A(lite), change the Group Name and Master
Name.
Perform setting from the Administrator Setting window.
- Set the same Group Name as CBM.
- Set System name of CBM to the Master Name.
(Setting Example)
Setting of
CBM
Group Name HPLC1
System Name CBM1
Master Name
Setting of
SPD-M20A
HPLC1
M20A1
CBM1
5 / 8