Power Cords - Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual

A-8 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

Power Cords

If you were not provided with a power cord for your server, you should
purchase a power cord that is approved for use in your country.
The power cord must be rated for the product and for the voltage and current
marked on the electrical ratings label of the product. The voltage and current
rating of the cord should be greater than the voltage and current rating marked
on the product. In addition, the diameter of the wire must be a minimum of
1.00 mm² or 18AWG, and the length of the cord must be between 1.8 m
(6 feet) and 3.6 m (12 feet). If you have questions about the type of power cord
to use, contact your Compaq authorized service provider.
A power cord must be routed so that it is not likely to be walked on or pinched
by items placed upon it or against it. Particular attention should be paid to the
plug, electrical outlet, and the point where the cord exits from the product.