Novell Netware/Intranetware; Materials Needed; Creating Novell Ssd Diskettes - Compaq 219700-001 - ProLiant - 1500 Reference Manual

Novell NetWare/intraNetWare

Use the instructions in this section to install the driver for a new SMART-2DH
Controller installation or to upgrade the driver in a server running
NetWare/intraNetWare and using the SMART-2DH Controller. If you use
SmartStart to install NetWare/intraNetWare and drivers, you do not need to
create the Novell Support Software Diskettes (SSD) and can skip to the section
"Handling Disk Drive Failures."

Materials Needed

You will need the following items to manually install the SMART-2DH
Controller driver on your server:
Compaq SmartStart and Support Software CD (supplied in the SMART-
2DH Array Controller Option Kit)
Up to four blank diskettes
Any server or workstation with a bootable CD-ROM drive

Creating Novell SSD Diskettes

Two NetWare/intraNetWare drivers for the SMART-2DH Array Controller—
CPQDA386.DSK v 3.10 or later and CPQARRAY.HAM—are located on the
Compaq SmartStart and Support Software CD that was supplied in the
SMART-2DH Array Controller Option Kit.
NOTE:
CPQARRAY.HAM—for your version of NetWare/intraNetWare see the online
help file on Disk 2 of Novell SSD.
Use Disk 4 of Novell SSD to access the latest drivers and documentation for
Compaq options in a NetWare/intraNetWare environment. To create the
diskettes:
1. Boot the server from the Compaq SmartStart and Support Software
CD.
2. From the Compaq System Utilities screen, select Create Support Software.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
To determine the appropriate driver—CPQDA386.DSK or
File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SMART-2DH Array Controller Reference Guide
6-3