Compaq 219700-001 - ProLiant - 1500 Reference Manual page 58

5. Click the Next button at the bottom of the screen. A screen similar to
the following figure is displayed.
Figure 5-10. Expansion Wizards - Logical Drive Screen
6. Click the Create Logical Drive button.
7. Set the fault tolerance, array accelerator, and size for logical drive 2.
8. Click the Next button.
9. Click the Done button.
10. At the main screen, select Controller, Save. This will save the new
settings for logical drive 2 and start the capacity expansion process.
Logical drive 2 will not be accessible until the capacity expansion
NOTE:
process has completed on logical drive 1.
CAUTION:
information is temporarily stored in the array accelerator memory.
Do not interchange SMART-2DH Controllers or Array Accelerator
boards during a capacity expansion process to prevent the loss of
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
File Name: F-CH05.DOC Last Saved On: 2/27/98 11:38 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
In case of power loss, capacity expansion process
SMART-2DH Array Controller Reference Guide
5-17