Download
Share
Print this page
Advantech AIMB-286F-00A1E User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. AIMB-286F-00A1E
  6. User manual
Advantech AIMB-286F-00A1E User Manual

Advantech AIMB-286F-00A1E User Manual

Intel core i7/i5/i3/pentium/celeron lga1151 mini-itx with dp++/hdmi/lvds (or edp), 6 com & 8 usb, 3 lan, and pciex4
Hide thumbs

Advertisement

Quick Links

Download this manual
User Manual
AIMB-286
Intel® Core™ i7/i5/i3/Pentium/
Celeron LGA1151 Mini-ITX with
DP++/HDMI/LVDS (or eDP), 6
COM & 8 USB, 3 LAN, and
PCIex4

Advertisement

loading
Need help?

Need help?

Do you have a question about the AIMB-286F-00A1E and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech AIMB-286F-00A1E

Summary of Contents for Advantech AIMB-286F-00A1E

  • Page 1 User Manual AIMB-286 Intel® Core™ i7/i5/i3/Pentium/ Celeron LGA1151 Mini-ITX with DP++/HDMI/LVDS (or eDP), 6 COM & 8 USB, 3 LAN, and PCIex4...

  • Page 2: Product Warranty (2 Years)

    Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.

  • Page 3: A Message To The Customer

    Advantech has come to be known. Your satisfaction is our primary concern. Here is a guide to Advantech’s cus- tomer services.

  • Page 4: Declaration Of Conformity

    Declaration of Conformity FCC Class B This device complies with the requirements in part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference.  This device must accept any interference received, including interference that ...

  • Page 5: Ordering Information

    G5400T Coffee Lake 2C/4T SR3XB 14nm G4900T Coffee Lake 2C/2T SR3YP 14nm Memory Compatibility Category Speed Capacity Vendor Chip_PN ADVANTECH P/N SEC 737 K4A4G08 SQR- DDR4 2666 Advantech 5WE BCTD SD4N8G2K6SNEEB SEC 749 K4A8G08 SQR- DDR4 2400 Advantech 5WB BCRC...

  • Page 6: Initial Inspection

    Initial Inspection Before you begin installing your motherboard, please make sure that the following materials have been shipped: 1 x AIMB-286 Intel Core™ i7/i5/i3 LGA1151 Mini-ITX motherboard  1 x SATA HDD cable  1-to-2 serial port cables, 22 cm ...

  • Page 7: Table Of Contents

    Contents Chapter General Information ......1 Introduction ....................2 Features ....................2 Specifications .................... 2 1.3.1 System ..................2 1.3.2 Memory ..................2 1.3.3 Input/Output .................. 2 1.3.4 Graphics..................3 1.3.5 Ethernet LAN ................3 1.3.6 Industrial Features ................ 3 1.3.7 Mechanical and Environmental Specifications......
  • Page 8 DP + HDMI Connector (DP1 + HDMI1) ..........17 Serial Ports (COM1~COM6) ..............17 PS/2 Keyboard and Mouse Connector (KBMS1)........18 CPU Fan Connector (CPU_FAN1) ............18 System FAN Connector (SYSFAN1/2) ........... 19 Power Switch/HDD LED/SMBUS/Speaker Pin Header (JFP1) & Power LED and Keyboard Lock Pin Header (JFP2) ..........
  • Page 9 Before You Begin .................. 102 Introduction ................... 102 Chapter Setup........103 Introduction ................... 104 Windows 10 VGA Driver Installation ............. 104 Chapter Configuration......105 Introduction ................... 106 Features ....................106 Installation ..................... 106 Windows® 10 Driver Setup (Realtek 8111H & Intel i211AT) ....106 Appendix A I/O Pin Assignments......107...
  • Page 10 A.39 CPU FAN Power Connector (CPUFAN1) ..........126 A.40 LVDS Backlight Inverter Power Connector (INV1)........ 126 A.41 SATA Power Connector (SATA_PWR2)..........126 A.42 SATA Power Connector (SATA_PWR1)..........127 A.43 eDP/LVDS Panel Connector (LVDS_EDP1)......... 127 A.44 ATX 12V Power Supply Connector (ATX12V1) ........128 A.45 SIM Card Connector (SIM1) ..............

  • Page 11: Chapter 1 General Information

    Chapter General Information...

  • Page 12: Introduction

    Introduction AIMB-286 is designed with the Intel® H310 PCH for industrial applications that require both performance computing and enhanced power management capabilities. The motherboard supports Intel desktop Corei7/i5/i3/Pentium/Celeron processors, up to 12 MB SmartCache, and 2 x DDR4 2666MHz SO-DIMMs up to 32 GB. Multiple I/O consists of 6 x serial ports, 4 x USB 3.0 + 4 USB 2.0, 3 x GbE LAN, 3 x SATA III, 1 x NGFF (M.2_E key) and 1 x NGFF (M.2_B Key).

  • Page 13: Graphics

    1.3.4 Graphics Controller: Intel® HD graphics.  Display memory: 512 MB maximum shared memory with 2GB and above sys-  tem memory installed. LVDS: Supports dual channel 24-bit up to 1920 x 1200 @ 60Hz.  HDMI1.4: Supports max. resolution 4096 x 2160 @ 24Hz. ...

  • Page 14: Jumpers And Connectors

    Jumpers and Connectors Connectors on the AIMB-286 motherboard link it to devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers.

  • Page 15: Board Layout: Jumper And Connector Locations

    Table 1.1: Connector and Header List ATX 12V Power Supply Connector ATX12V1 SIM Card Connector SIM1 Buzzer CPU Back Plate CPU0_BACKPLATE1 Table 1.2: Jumper List Description Location Name LVDS VESA, JEIDA Format Selection Pin Header JLVDS_VCON1 CMOS Clear Jumper JCMOS1 Watchdog Timer Output and OBS Beep JWDT1+JOBS1 COM1 RI# pin RI#/5V/12V Select...
  • Page 16 SIM1 Figure 1.2 Jumper and Connector Location (Bottom Side) AIMB-286 User Manual...

  • Page 17: Aimb-286 Board Diagram

    AIMB-286 Board Diagram Display Port 1.2 Display port PCIe x 4 PCIe x 4 (Gen 3) LVDS 24/48 bits Intel 8th Gen Display port Channel A DDR4 2666 MHz SO-DIMM Core i7/i5/i3/Pentium/ eDP (optional) Celeron processor Channel B DDR4 2666 MHz SO-DIMM HDMI 1.4 Display port GbE LAN1: Realtek 8111H...

  • Page 18: Safety Precautions

    Safety Precautions Warning! Always completely disconnect the power cord from chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.

  • Page 19: Jumper Settings

    Jumper Settings This section provides instructions on how to configure your motherboard by setting the jumpers. It also includes the motherboard's default settings and your options for each jumper. 1.8.1 How to Set Jumpers You can configure your motherboard to match the needs of your application by set- ting the jumpers.

  • Page 20: Power Led And Keyboard Lock Pin Header (Jfp2)

    1.8.4 Power LED and Keyboard Lock Pin Header (JFP2) 1 2 3 4 5 Table 1.5: Power LED and Keyboard Lock Pin Header (JFP2) Signal LED Power Keyboard LOCK# 1.8.5 Watchdog Timer Output and OBS Beep (JWDT1+JOBS1) Table 1.6: Watchdog Timer Output and OBS Beep (JWDT1+JOBS1) Function Jumper Setting Watchdog Timer Output(2-3) (Default)

  • Page 21: Lvds/Edp Panel Voltage Selection (Jlvds1)

    1.8.7 LVDS/eDP Panel Voltage Selection (JLVDS1) Table 1.8: LVDS/eDP Panel Voltage Selection (JLVDS1) Function Jumper Setting Jumper position for 5V JLVDS1 (2-4) Jumper position for 3.3V (Default) JLVDS1 (4-6) Jumper position for 12V JLVDS1 (3-4) 1.8.8 COM1 RI# Pin RI#/5V/12V Select (JSETCOM1_V1) Table 1.9: COM1 RI# Pin RI#/5V/12V Select (JSETCOM1_V1) Function Jumper Setting...

  • Page 22: Jcaseop_Sw1: Case Open Selection Pin Header

    1.8.9 JCASEOP_SW1: Case Open Selection Pin Header Table 1.10: JCASEOP_SW1: Case Open Selection Pin Header Function Jumper Setting Normal Open Normal Close (Default) 1.8.10 JLVDS_VCON1: LVDS VESA, JEIDA Format Selection Pin Header Table 1.11: JLVDS_VCON1: LVDS VESA, JEIDA Format Selection Pin Header Function Jumper Setting...

  • Page 23: Cache Memory

    1.11 Cache Memory The AIMB-286 supports a CPU with one of the following built-in full speed last level caches: 12MB for Intel Core i7-8700/ i7-8700T 9MB for Intel Core i5-8500/ i5-8500T 6MB for Intel Core i3-8100/ i3-8100T 4MB for Pentium G5400/ G5400T 2MB for Celeron G4900/ G4900T The built-in second-level cache in the processor yields much higher performance than conventional external cache memories.
  • Page 24 AIMB-286 User Manual...

  • Page 25: Chapter 2 Connecting Peripherals

    Chapter Connecting Peripherals...

  • Page 26: Introduction

    Introduction You can access most of the connectors from the top of the board as it is being installed in the chassis. If you have a number of cards installed or have a packed chassis, you may need to partially remove the card to make all the connections. LAN + USB Ports (LAN1/2/3, USB12, USB34) The AIMB-286 provides up to 8 x USB ports.

  • Page 27: Dp + Hdmi Connector (Dp1 + Hdmi1)

    DP + HDMI Connector (DP1 + HDMI1) Serial Ports (COM1~COM6) COM1/2  COM3456 COM3456 COM1/2  AIMB-286 supports six serial ports, COM1/4/5/6 supports RS-232 function, COM2/3 support RS-232/422/485 function (RS422/485 support by BOM optional). These ports can connect to serial devices, such as a mouse or a printer, or to a communica- tions network.

  • Page 28: Ps/2 Keyboard And Mouse Connector (Kbms1)

    PS/2 Keyboard and Mouse Connector (KBMS1) On board 6-pin wafer box connector, supports one standard PS/2 keyboard, one standard PS/2 mouse. CPU Fan Connector (CPU_FAN1) If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. AIMB-286 User Manual...

  • Page 29: System Fan Connector (Sysfan1/2)

    System FAN Connector (SYSFAN1/2) If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. Power Switch/HDD LED/SMBUS/Speaker Pin Header (JFP1) & Power LED and Keyboard Lock Pin Header (JFP2) There are several headers for monitoring and controlling the AIMB-286. JFP1 JFP2 2.8.1...

  • Page 30: Reset (Jfp1/Reset)

    2.8.2 Reset (JFP1/RESET) Many computer cases offer the convenience of a reset button. Connect the wire for the reset button. 2.8.3 HDD LED (JFP1/HDDLED) You can connect an LED to connector (JFP1/HDDLED) to indicate when the HDD is active. 2.8.4 External Speaker (JFP1/SPEAKER) JFP1/SPEAKER is a 4-pin connector for an external speaker.

  • Page 31: Atx 12V Power Supply Connector (Atx12V1) & Atx Power Supply Connector (Atx_5Vsb1)

    ATX 12V Power Supply Connector (ATX12V1) & ATX Power Supply Connector (ATX_5VSB1) ATX12V1 ATX_5VSB1 2.10 SATA Signal Connector (SATA1/2/3) SATA1 SATA3 SATA2 AIMB-286 features a high performance Serial ATA III interface (up to 600 MB/s) which eases hard drive cabling with thin, space-saving cables. AIMB-286 User Manual...

  • Page 32: Hd Analog Audio Interface (Audio1/2, Fpaud1)

    2.11 HD Analog Audio Interface (AUDIO1/2, FPAUD1) AUDIO1/2 FPAUD1 2.12 PCI-E X4 Slot (PCIEX4_1) AIMB-286 User Manual...

  • Page 33: Edp/Lvds Panel Connector (Lvds_Edp1)(Edp Support Bom Optional)

    2.13 eDP/LVDS Panel Connector (LVDS_EDP1)(eDP support BOM optional) LVDS1 Pin 3: GND -> Panel connected NC/3.3V -> No panel 2.14 LVDS/eDP Backlight Inverter Power Connector (INV1) Signal Description Note!  Signal Signal Description Vadj=0.75 V (Recommended: 4.7 K, 1/16 W) ENBKL LCD backlight ON/OFF control signal) AIMB-286 User Manual...

  • Page 34: Ngff M.2 E-Key Connector For 2230 Module (M2E1)

    2.15 NGFF M.2 E-Key Connector for 2230 Module (M2E1) 2.16 NGFF M.2 B-Key Connector for 2242/3042 Module (M2B1) AIMB-286 User Manual...

  • Page 35: Hd Digital Audio Interface (Spdif1)

    2.17 HD Digital Audio Interface (SPDIF1) 2.18 Audio Amplifier Output Connector (AMP1) AIMB-286 User Manual...

  • Page 36: General Purpose I/O Pin Header (Gpio1)

    2.19 General Purpose I/O Pin Header (GPio1) 2.20 SPI BIOS Flash Socket (SPI1) AIMB-286 User Manual...

  • Page 37: Spi Programming Pin Header (Spi_Cn1)

    2.21 SPI Programming Pin Header (SPI_CN1) 2.22 Low Pin Count Header (LPC1) AIMB-286 User Manual...

  • Page 38: Case-Open Detect Connector (Jcase1)

    2.23 Case-Open Detect Connector (JCASE1) The SPI flash card pin header may be used to flash BIOS if the AIMB-286 cannot power on. 2.24 Battery Wafer Box (BAT1) AIMB-286 User Manual...

  • Page 39: Cpu Socket (Cpu1)

    2.25 CPU Socket (CPU1) 2.26 DDR4 SO-DIMM Socket (DIMMA1, DIMMB1) AIMB-286 User Manual...

  • Page 40: Sata Power Connector (Sata_Pwr1/2)

    2.27 SATA Power Connector (SATA_PWR1/2) 2.28 DC Input Connector (DCIN1) AIMB-286 User Manual...

  • Page 41: Bios Operation

    Chapter BIOS Operation...

  • Page 42: Introduction

    Introduction With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of your computer. The Setup program uses a number of menus for making changes and turning special features on or off. This chapter describes the basic navigation of the AIMB-286 setup screens.

  • Page 43: Main Menu

    3.2.1 Main Menu Press <Del> to enter AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu. The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured.

  • Page 44: Advanced Bios Features

    3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-286 Setup menu to enter the Advanced BIOS Setup page. Users can select any item in the left frame of the screen, such as CPU Configuration, to access the submenu for that item. Select an Advanced BIOS Setup option by highlighting the text using the <Arrow>...
  • Page 45 3.2.2.1 Platform Misc Configuration Native PCIE Enable [Enable]  Native ASPM [Auto]  AIMB-286 User Manual...
  • Page 46 3.2.2.2 CPU Configuration CPU Flex Ratio Override [Disabled]  Intel (VMX) Virtualization [Enabled]  PECI [Enabled]  Active Processor Cores [All]  BIST [Disabled]  AES [Enabled]  AIMB-286 User Manual...
  • Page 47 CPU SMM Enhancement SMM Use Delay Indication [Enabled]  SMM Use Block Indication [Enabled]  AIMB-286 User Manual...
  • Page 48 3.2.2.3 Power & Performance AIMB-286 User Manual...
  • Page 49 CPU - Power Management Control Boot Performance Mode [Max Non-Turbo Performance]  Intel® SpeedStep (tm) [Enabled]  Race To Halt (RTH) [Enabled]  Intel (R) Speed Shift Technology [Enabled]  HDC Control [Enabled]  Platform PL1 Enable [Disabled]  Platform PL2 Enable [Disabled] ...
  • Page 50 CPU VR Settings Intersil VR Command [Disabled]  AIMB-286 User Manual...
  • Page 51 Acoustic Noise Settings Acoustic Noise Mitigation [Disabled]  Disable Fast PKG C State Ramp for IA Domain [FALSE]  Slow Slew Rate for IA Domain [Fast/2]  Disable Fast PKG C State Ramp for GT Domain [FALSE]  Slow Slew Rate for GT Domain [Fast/2] ...
  • Page 52 Core/IA VR Settings VR Config Enable [Enabled]  PS3 Enable [Enabled]  PS4 Enable [Enabled]  TDC Enable [Enabled]  TDC Time Window [1 ms]  TDC Lock [Disabled]  AIMB-286 User Manual...
  • Page 53 CPU VR Settings VR Config Enable [Enabled]  PS3 Enable [Enabled]  PS4 Enable [Enabled]  TDC Enable [Enabled]  TDC Time Window [1 ms]  TDC Lock [Disabled]  AIMB-286 User Manual...
  • Page 54 Custom P-State Table AIMB-286 User Manual...
  • Page 55 Power Limit 3 Override [Disabled]  AIMB-286 User Manual...
  • Page 56 3.2.2.4 PCH-FW Configuration Me FW Image Re-Flash [Disabled]  Local FW Update [Enabled]  AIMB-286 User Manual...
  • Page 57 3.2.2.5 Power & Performance RC6 (Render Standby) [Enabled]  Maximum GT frequency [Default Max Frequency]  Disable Turbo GT frequency [Disabled]  AIMB-286 User Manual...
  • Page 58 ME State [Enabled]  3.2.2.6 Trusted Computing AIMB-286 User Manual...
  • Page 59 Security Device Support [Enabled]  SHA-1 PCR Bank [Enabled]  SHA256 PCR Bank [Enabled]  Pending operation [None]  Platform Hierarchy [Enabled]  Storage Hierarchy [Enabled]  Endorsement Hierarchy [Enabled]  TPM2.0 UEFI Spec Version [TCG_2]  Physical Presence Spec Version [1.3] ...
  • Page 60 3.2.2.7 ACPI Settings Enable ACPI Auto Configuration [Disabled]  Enable Hibernation [Enabled]  ACPI Sleep State [S3 (Suspend to RAM)]  Lock Legacy Resource [Disabled]  S3 Video Repost [Disabled]  AIMB-286 User Manual...
  • Page 61 3.2.2.8 NCT6776 Super I/O Configuration Super I/O Chip NCT6776 Case Open Warning [Disabled]  Wake On Ring [Disabled]  Watch Dog Timer [Disabled]  AIMB-286 User Manual...
  • Page 62 Serial Port 1 Configuration Serial Port [Enabled]  – Device Settings: I/O=3F8h; IRQ =4 – Change Settings [Auto] To select an optimal setting for serial port 1. AIMB-286 User Manual...
  • Page 63 Serial Port 2 Configuration Serial Port [Enabled]  Device Settings: I/O=2F8h; IRQ =3  Change Settings [Auto]  To select an optimal setting for serial port 2. RS485 Auto Flow Control Function [Disabled]  AIMB-286 User Manual...
  • Page 64 Digital I/O Configuration Digital I/O Pin 1 - 16 [Input]  3.2.2.9 NCT6776 HW Monitor AIMB-286 User Manual...
  • Page 65 CPU Warning Temperature [Disabled]  Use this to set the CPU warning temperature threshold. When the system reaches the warning temperature, the speaker will beep. ACPI Shutdown Temperature [Disabled]  Use this to set the ACPI shutdown temperature threshold. When the system reaches the shutdown temperature, it will be automatically shut down by ACPI OS to protect the system from overheating damage.
  • Page 66 Smart Fan Mode Configuration CPU FAN Mode [SMART FAN IV Mode]  The item shows you CPU temperature and fan speed (PWM) information. SYSFAN Mode [SMART FAN IV Mode]  The item shows you system temperature and fan speed (PWM) information. AIMB-286 User Manual...
  • Page 67 3.2.2.10 NCT5114DSEC Super I/O Configuration AIMB-286 User Manual...
  • Page 68 Serial Port 3 Configuration Serial Port [Enabled]  Device Settings: I/O=240h; IRQ =5. Change Setting [Auto]  To select an optimal setting for serial port 3. RS-485 Auto Flow Control Function [Disabled]  AIMB-286 User Manual...
  • Page 69 Serial Port 4 Configuration Serial Port [Enabled]  Device Settings: I/O=248h; IRQ =5. Change Setting [Auto]  To select an optimal setting for serial port 4. AIMB-286 User Manual...
  • Page 70 Serial Port 5 Configuration Serial Port [Enabled]  Device Settings: I/O=250h; IRQ =5. Change Setting [Auto]  To select an optimal setting for serial port 5. AIMB-286 User Manual...
  • Page 71 Serial Port 6 Configuration Serial Port [Enabled]  Device Settings: I/O=258h; IRQ =5. Change Setting [Auto]  To select an optimal setting for serial port 6. AIMB-286 User Manual...
  • Page 72 3.2.2.11 S5 RTC Wake Settings The item allows you enable or disable system wake up on alarm event. Wake system from S5 [Disabled]  AIMB-286 User Manual...
  • Page 73 3.2.2.12 Serial Port Console Redirection Console Redirection [Disabled]  AIMB-286 User Manual...
  • Page 74 Redirection COM Port [COM1]  Resolution [80x24]  Redirect After POST [Always Enable]  AIMB-286 User Manual...
  • Page 75 3.2.2.13 Intel TXT Information AIMB-286 User Manual...
  • Page 76 3.2.2.14 USB Configuration Legacy USB Support [Enabled]  XHCI Hand-off [Enabled]  USB Mass Storage Driver Support [Enabled]  USB transfer time-out [20 sec]  Device reset time-out [20 sec]  AIMB-286 User Manual...
  • Page 77 Device power-up delay [Auto]  JetFlashTranscend 32GB 1100 [Auto]  3.2.2.15 Network Stack Configuration Network Stack [Disabled]  AIMB-286 User Manual...
  • Page 78 3.2.2.16 CSM Configuration CSM Support [Enabled]  GateA20 Active [Upon request]  INT19 Trap Response [Immediate]  Boot Option Filter [UEFI only]  Network [UEFI]  AIMB-286 User Manual...

  • Page 79: Chipset Configuration Setting

    Storage [UEFI]  Video [UEFI]  Other PCI device [UEFI]]  Note! If your HDD or other boot device is installed as Legacy mode, it may cause a blue screen crash. There are 2 ways to solve this: Re-install your OS as UEFI Mode Change all of settings above as "Legacy"...
  • Page 80 3.2.3.1 System Agent (SA) Configuration VT-d [Enabled]  Above 4GB MMIO BIOS assignment [Disabled]  Memory Configuration AIMB-286 User Manual...
  • Page 81 The item shows you memory specification included RC version, frequency, size and voltage information etc. Maximum Memory Frequency (Auto)  Max TOLUD (Dynamic)  Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD auto- matically based on largest MMIO length of installed graphic controller. Fast Boot [Enabled] ...
  • Page 82 Graphics Configuration Skip Scanning of External Gfx Card [disabled]  Primary Display [Auto]  Select which of IGFX/PEG/PCI Graphics device should be Primary Display. Select PCIE Card [Auto]  Internal Graphics [Auto]  Keep IGD enabled based on the setup options. GTT size [8MB] ...
  • Page 83 LCD Control LVDS Panel Type [Disabled]  eDP/LVDS Backlight Signal Control [LINEAR]  AIMB-286 User Manual...
  • Page 84 DMIOPI Configuration DMI Max Link Speed [Auto]  DMI Gen3 Eq Phase 2 [Auto]  DMI Gen3 Eq Phase 3 Method [Auto]  Program Static Phase1 Eq [Enabled]  DMI Link ASPM Control [L0Sl1]  AIMB-286 User Manual...
  • Page 85 DMI Extended Sync Control [Disabled]  DMI De-emphasis Control [-3.5 dB]  DMI IoT [Disabled]  AIMB-286 User Manual...
  • Page 86 AIMB-286 User Manual...
  • Page 87 PEG Port Configuration AIMB-286 User Manual...
  • Page 88 Enable Root Port [Auto]  Max Link Speed [Auto]  PEG0 Slot Power Limit Scale [1.0x]  Program PCIe ASPM after OpROM [Disabled]  Enabled: PCIe ASPM will be programmed after OpROM. Disabled: PCIe ASPM will be programmed before OpROM. Program Static Phase1 Eq [Enabled] ...
  • Page 89 Detect Non-Compliance Device [Disabled]  AIMB-286 User Manual...
  • Page 90 Gen3 Root Port Preset Value for each Lane  Root Port Preset Value Per lane for Gen3 Equalization. AIMB-286 User Manual...
  • Page 91 Gen3 Endpoint Preset Value each Lane  Endpoint Preset Value Per lane for Gen3 Equalization. AIMB-286 User Manual...
  • Page 92 Endpoint Hint Value Per lane for Gen3 Equalization. Gen3 Endpoint Hint Value each Lane  AIMB-286 User Manual...
  • Page 93 PEG10 RxCTLE Override [Disabled]  PEG11 RxCTLE Override [Disabled]  PEG12 RxCTLE Override [Disabled]  DMI RxCTLE Override [Disabled]  AIMB-286 User Manual...
  • Page 94 3.2.3.2 PCH-I/O Configuration PCI Express Configuration PCI Express Configuration  SATA And RST Configuration  Security Configuration  AIMB-286 User Manual...
  • Page 95 HD Audio Configuration  LAN1 Controller [Enabled]  Enable or disable the LAN1 controller. LAN1 PXE OpROM [Disabled]  Enable or disable the LAN1 controller. LAN 2 controller [Enabled]  Enable or disable the LAN2 controller. LAN2 PXE OpROM [Disabled] ...
  • Page 96 Override SW EQ Settings [Disabled]  AIMB-286 User Manual...
  • Page 97 M.2 E-key Slot M.2 E-Key slot [Enabled]  Control the M.2 E-Key Root Port. ASPM 4 [Disabled]  Set the ASPM Level: Force L0s - Force all links to L0s State: AUTO - BIOS auto configure: DISABLE - Disables ASPM. AIMB-286 User Manual...
  • Page 98 L1 Substates [Disabled]  Hot Plug [Disabled]  Advanced Errors Reporting [Disabled]  PCIE Speed [Auto]  M.2 B-key Slot M.2 B-Key slot [Enabled]  Control the M.2 E-Key Root Port. ASPM 10 [Disabled]  Set the ASPM Level: Force L0s - Force all links to L0s State: AUTO - BIOS auto configure: DISABLE - Disables ASPM.
  • Page 99 SATA and RST Configuration SATA Controller(s) [Enabled]  SATA Mode Selection [AHCI]  Aggressive LPM Support [Enabled]  SATA Controller Speed [Default]  AIMB-286 User Manual...
  • Page 100 M.2 B-key Slot (SATA) Port 0 [Enabled]  Spin Up Device [Disabled]  SATA Device Type [Hard Disk Drive]  SATA Port 0 DevS1p [Disabled]  DIT0 Configuration [Disabled]  Serial ATA Port 1 (SATA) Port 1 [Enabled]  Spin Up Device [Disabled] ...
  • Page 101 RTC Memory Lock [Enabled]  BIOS Lock [Enabled]  HD Audio Configuration AIMB-286 User Manual...
  • Page 102 HD Audio [Enabled]  AIMB-286 User Manual...

  • Page 103: Security

    3.2.4 Security Administrator Password  Select this option and press <ENTER> to access the sub menu, and then type in the password. Set the Administrator password. User Password  Select this option and press <ENTER> to access the sub menu, and then type in the password.

  • Page 104: Boot Setting

    3.2.5 Boot Setting Setup Prompt Timeout  Use the <+> and <-> keys to adjust the number of seconds to wait for setup activation key. Bootup NumLock State [Off]  On or Off power on state for the NumLock. Quiet Boot [ Disabled ] ...

  • Page 105: Save & Exit Configuration

    3.2.6 Save & Exit Configuration Save Changes and Exit  When users have completed system configuration, select this option to save changes, exit BIOS setup menu and reboot the computer to take effect of all system configuration parameters. 1. Select Save Changes and Exit from the Save & Exit menu and press <Enter>.
  • Page 106 Discard Changes and Reset  Select this option to quit Setup without making any permanent changes to the system configuration. 1. Select Discard Changes and Reset from the Save & Exit menu and press <Enter>. The following message appears: Discard Changes and exit setup Now? [Ok] or [Cancel].

  • Page 107: Software Introduction & Service

    Chapter Software Introduction & Service...

  • Page 108: Introduction

    Introduction The mission of Advantech Embedded Software Services is to “Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology.” We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
  • Page 109 4.2.1.2 Display Brightness Control The Brightness Control API allows a developer to access embedded devices and easily control brightness. Backlight The Backlight API allows a developer to control the backlight (screen) on/off in embedded devices. 4.2.1.3 Monitor Watchdog A watchdog timer (WDT) is a device that performs a specific operation after a certain period of time if something goes wrong and the system does not recover on its own.

  • Page 110: Software Utility

    4.2.2 Software Utility BIOS Flash The BIOS Flash utility allows customers to update the flash ROM BIOS version, or use it to back up current BIOS by copying it from the flash chip to a file on customers’ disk. The BIOS Flash utility also provides a command line version and an API for fast implementation into custom- ized applications.

  • Page 111: Chipset Software Installation Utility

    Chapter Chipset Software Installation Utility...

  • Page 112: Before You Begin

    To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-286 are located on the Advantech support website: http://support.advantech.com/Support/. The drivers on the support website will guide and link you to the utilities and drivers under a Win- dows system.

  • Page 113: Vga Setup

    Chapter VGA Setup...

  • Page 114: Introduction

    Introduction The 8th Gen Intel Core i processors are embedded with an integrated graphics con- troller. You need to install the VGA driver to enable the function. Optimized integrated graphic solution: Intel Graphics Flexible supports versatile dis- play options and a 32-bit 3D graphics engine. Dual independent displays include enhanced display modes for widescreen flat panels for, extended, twin, clone and dual display modes, and optimized 3D support delivers an intensive and realistic visual experience.

  • Page 115: Lan Configuration

    Chapter LAN Configuration...

  • Page 116: Introduction

    Introduction The AIMB-286 has three Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Realtek 8111H (LAN1/2) and Intel i211AT (LAN3)) that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. Features Integrated 10/100/1000 Mbps transceiver ...

  • Page 117: Appendix A I/O Pin Assignments

    Appendix I/O Pin Assignments...

  • Page 118: Dc Input Phoenix Connector (Dcin1)

    DC Input Phoenix Connector (DCIN1) Signal Pin Definition Power input (Only +12V) Definition Multimedia Interface (DP1+HDMI1) Signal Pin Definition Signal Pin Definition HDMI1_Z_D2+ DP1_0+ HDMI1_Z_D2- DP1_0- HDMI1_Z_D1+ DP1_1+ HDMI1_Z_D1- DP1_1- HDMI1_Z_D0+ DP1_2+ HDMI1_Z_D0- DP1_2- HDMI1_Z_CLK+ DP1_3+ HDMI1_Z_CLK- DP1_3- DP1_AUX_EN# HDMI1_SCL DP1_AUX+ HDMI1_SDA DP1_AUX-...

  • Page 119: Atx Power Supply (5Vsb) Connector (Atx_5Vsb1)

    ATX Power Supply (5VSB) Connector (ATX_5VSB1) Signal Pin Definition +V5SB PS_ON# USB 3.0 Stack Connector (USB12) Signal Pin Definition Signal Pin Definition USB_D1- USB_D2- USB_D1+ USB_D2+ USB31X1_z_RX- USB31X2_z_RX- USB31X1_z_RX+ USB31X2_z_RX+ USB31X1_z_TX- USB31X2_z_TX- AIMB-286 User Manual...

  • Page 120: Usb 3.0 Stack Connector (Usb34)

    USB 3.0 Stack Connector (USB34) Signal Pin Definition Signal Pin Definition USB_D3- USB_D4- USB_D3+ USB_D4+ USB31X3_z_RX- USB31X4_z_RX- USB31X3_z_RX+ USB31X4_z_RX+ USB31X3_z_TX- USB31X4_z_TX- RJ45 2 Port (LAN12) Signal Pin Definition Signal Pin Definition LAN1_MDI0+ LAN2_MDI0+ LAN1_MDI0- LAN2_MDI0- LAN1_MDI1+ LAN2_MDI1+ LAN1_MDI1- LAN2_MDI1- LAN1_CONN LAN2_CONN LAN1_CT LAN2_CT...

  • Page 121: Platform Controller Hub (Pch1)

    Platform Controller Hub (PCH1) RJ45 1 Port (LAN1) Signal Pin Definition LAN1_MDI0+ LAN1_MDI0- LAN1_MDI1+ LAN1_MDI1- LAN1_CONN LAN1_CT LAN1_MDI2+ LAN1_MDI2- LAN1_MDI3+ LAN1_MDI3- LAN1_LED0_ACT#_R +V3.3_DUAL LAN1_LED1_1G#_R LAN1_LED2_100M#_R AIMB-286 User Manual...

  • Page 122: Sata Signal Connector (Sata2)

    SATA Signal Connector (SATA2) Signal Pin Definition A.10 RJ45 1 Port (LAN3) Signal Pin Definition LAN3_MDI0+ LAN3_MDI0- LAN3_MDI1+ LAN3_MDI1- LAN3_CONN LAN3_CT LAN3_MDI2+ LAN3_MDI2- LAN3_MDI3+ LAN3_MDI3- LAN3_LED0_ACT#_R +V3.3_LAN3_R LAN3_LED1_1G#_R LAN3_LED2_100M#_R AIMB-286 User Manual...

  • Page 123: Battery Wafer Box (Bat1)

    A.11 Battery Wafer Box (BAT1) Signal Pin Definition VBAT A.12 HD Analog Audio Interface (AUDIO1) Signal Pin Definition LINE-OUT A.13 HD Analog Audio Interface (AUDIO2) Signal Pin Definition AIMB-286 User Manual...

  • Page 124: Front Hd Analog Audio Interface (Fpaud1)

    A.14 Front HD Analog Audio Interface (FPAUD1) Signal Pin Definition Signal Pin Definition MIC IN L MIC IN R FPAUD_DETECT# LINE OUT R SENSE R1 SENSE LINE OUT L SENSE R2 A.15 Audio Amplifier Output Connector (AMP1) Signal Pin Definition A.16 HD Digital Audio Interface (SPDIF1) Signal Pin Definition...

  • Page 125: Sata Signal Connector (Sata1)

    A.17 SATA Signal Connector (SATA1) Signal Pin Definition A.18 PCI-E x4 Slot (PCIEX4_1) Signal Pin Definition Signal Pin Definition +12V PRSNT1# +12V +12V +12V +12V SMB_CLK Reserved SMB_DATA Reserved Reserved +3.3V Reserved Reserved +3.3V +3.3VAUX +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0-...

  • Page 126: Ngff M.2 E-Key Connector For 2230 Module (M2E1)

    RX1+ RX1- TX2+ TX2- RX2+ RX2- TX3+ TX3- RX3+ Reserved RX3- Reserved CONFIG2 A.19 NGFF M.2 E-Key Connector for 2230 Module (M2E1) Signal Pin Definition6 Signal Pin Definition +3.3V USB_D+ +3.3V USB_D- LED1# (I)(OD) PCM_CLK/I2S SCK (O/I)(0/1.8V) CNV_WR_z_D1- PCM_SYNC/I2S WS (io)(0/1.8V) CNV_WR_z_D1+ PCM_IN/I2S SD_IN (I)(0/1.8V) PCM_OUT/I2S SD_OUT (O)(0/...

  • Page 127: Sata Signal Connector (Sata3)

    CNV_MFUART2_TXD REFCLKp0 CNV_MFUART2_RXD REFCLKn0 SUSCLK(32kHz) (O)(0/3.3V) PERST0# (O)(0/3.3V) CLKREQ0# W_DISABLE2# (O)(0/3.3V) PEWAKE0# W_DISABLE1# (O)(0/3.3V) RESERVED RESERVED/PETp1 RESERVED RESERVED/PETn1 RESERVED M.2_38P4M_REFCLK RESERVED/PERp1 RESERVED RESERVED/PERn1 RESERVED PCIE_WAKE# RESERVED/REFCLKp1 +3.3V RESERVED/REFCLKn1 +3.3V A.20 SATA Signal Connector (SATA3) Signal Pin Definition AIMB-286 User Manual...

  • Page 128: Ngff M.2 B-Key Connector For 2242/3042 Module (M2B1)

    A.21 NGFF M.2 B-Key Connector for 2242/3042 Module (M2B1) Signal Pin Definition6 Signal Pin Definition CONFIG_3 +3.3V +3.3V FULL_CARD_POWER_OFF# USB_D+ W_DISABLE1# USB_D- Connector KEY Connector KEY Connector KEY Connector KEY Connector KEY Connector KEY Connector KEY Connector KEY CONFIG_0 PCIE_WAKE# M.2_GNSS_DISABLE# PERn1/USB3.0-Rx-/SSIC-RxN UIM-RESET (I)

  • Page 129: Usb 2.0 Pin Header (Usb56)

    +3.3V +3.3V CONFIG_2 A.22 USB 2.0 Pin Header (USB56) Signal Pin Definition Signal Pin Definition USB_D5- USB_D6- USB_D5+ USB_D6+ A.23 USB 2.0 Pin Header (USB78) Signal Pin Definition Signal Pin Definition USB_D7- USB_D8- USB_D7+ USB_D8+ AIMB-286 User Manual...

  • Page 130: General Purpose I/O Pin Header (Gpio1)

    A.24 General Purpose I/O Pin Header (GPIO1) Signal Pin Definition Signal Pin Definition GPio0 GPio8 GPio1 GPio9 GPio2 GPio10 GPio3 GPio11 GPio4 GPio12 GPio5 GPio13 GPio6 GPio14 GPio7 GPio15 +5VSB +5VSB A.25 DDR4 SO-DIMM Socket (DIMMA1) Please see JEDEC STANDARD Pin Definition AIMB-286 User Manual...

  • Page 131: Ddr4 So-Dimm Socket (Dimmb1)

    A.26 DDR4 SO-DIMM Socket (DIMMB1) Please see JEDEC STANDARD Pin Definition A.27 COM 4 Port (COM3456) Signal Pin Definition Signal Pin Definition DCD# [3] DSR# [3] RXD [3] RST# [3] TXD [3] CTS# [3] DTR# [3] RI# [3] DCD# [4] DSR# [4] RXD [4] RST# [4]...

  • Page 132: Ps/2 Keyboard And Mouse Connector (Kbms1)

    RXD [6] RST# [6] TXD [6] CTS# [6] DTR# [6] RI# [6] A.28 PS/2 Keyboard and Mouse Connector (KBMS1) Signal Pin Definition KB CLK KB DATA MS CLK MS DATA A.29 Low Pin Count Header (LPC1) Signal Pin Definition Signal Pin Definition CLK (24MHz) RESET# FRAME#...

  • Page 133: Com 2 Port (Com12)

    A.30 COM 2 Port (COM12) Signal Pin Definition Signal Pin Definition DCD# [1] DSR# [1] RXD [1] RST# [1] TXD [1] CTS# [1] DTR# [1] RI# [1] DCD# [2] DSR# [2] RXD [2] RST# [2] TXD [2] CTS# [2] DTR# [2] RI# [2] A.31 Power LED and Keyboard Lock Pin Header...

  • Page 134: Spi Programming Pin Header (Spi_Cn1)

    A.33 SPI Programming Pin Header (SPI_CN1) Signal Pin Definition Signal Pin Definition +3.3V MISO MOSI A.34 SPI BIOS Flash Socket (SPI1) Signal Pin Definition Signal Pin Definition MOSI MISO WP# / io2 HOLD# / io3 +3.3V A.35 SYSTEM FAN Power Connector (SYSFAN1) Signal Pin Definition SYSTEM FAN VCC SYSTEM FAN SPEED...

  • Page 135: System Fan Power Connector (Sysfan2)

    A.36 SYSTEM FAN Power Connector (SYSFAN2) Signal Pin Definition SYSTEM FAN VCC SYSTEM FAN SPEED SYSTEM FAN PWM A.37 TI’s SMBUS Programming for +Vcore/+VCCGT Controller (JSMB1) Signal Pin Definition TPS53655_SMB_CLK TPS53655_SMB_Dio A.38 LGA1151 CPU Socket H4 (CPU1) AIMB-286 User Manual...

  • Page 136: Cpu Fan Power Connector (Cpufan1)

    A.39 CPU FAN Power Connector (CPUFAN1) Signal Pin Definition CPU FAN VCC CPU FAN SPEED CPU FAN PWM A.40 LVDS Backlight Inverter Power Connector (INV1) Signal Pin Definition +12V BKL_EN BKL_CTRL A.41 SATA Power Connector (SATA_PWR2) Signal Pin Definition +V12 AIMB-286 User Manual...

  • Page 137: Sata Power Connector (Sata_Pwr1)

    A.42 SATA Power Connector (SATA_PWR1) Signal Pin Definition +V12 A.43 eDP/LVDS Panel Connector (LVDS_EDP1) Signal Pin Definition Signal Pin Definition LVDS_DET# A0N(EDP_CPU_TXN2) A0P(EDP_CPU_TXP2) CLK1N(EDP_CPU_TXN3) CLK2N CLK1P(EDP_CPU_TXP3) CLK2P GND(EDP_CH7511_HPD) ENBKL VCON AIMB-286 User Manual...

  • Page 138: Atx 12V Power Supply Connector (Atx12V1)

    A.44 ATX 12V Power Supply Connector (ATX12V1) Signal Pin Definition +12V +12V A.45 SIM Card Connector (SIM1) Signal Pin Definition UIM_PWR UIM_RESET UIM_CLK UIM_VPP UIM_DATA A.46 Buzzer (SP1) AIMB-286 User Manual...

  • Page 139: Cpu Back Plate (Cpu0_Backplate1)

    A.47 CPU Back Plate (CPU0_BACKPLATE1) AIMB-286 User Manual...
  • Page 140 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2021...

This manual is also suitable for:

Aimb-286Aimb-286fl-00a1eAimb-286g2-00a1eAimb-286l-00a1e