Troubleshooting Shared Storage Subsystem Problems; Verifying Host Adapter Device Driver Installation; Verifying Kgpsa-Bc Device Driver Initialization - Compaq 112726-001 - ProLiant - 6500 Administrator's Manual

7-10 Compaq Parallel Database Cluster Model PDC/O5000 for Oracle8i and Windows 2000 Administrator Guide
Troubleshooting Shared Storage
Subsystem Problems

Verifying Host Adapter Device Driver Installation

Verifying KGPSA-BC Device Driver Initialization

I
Make sure that the Oracle TNSListener is running on the cluster nodes.
From the Services screen, verify that it is started.
I
Make sure that the Oracle Listener files are set up on the cluster nodes
by using the Oracle TNSPing utility.
I
Run the Object Link Manager GUI from each node to verify correct
Oracle partitions and symbolic link associations. Refer to Appendix A,
"Diagnosing and Resolving Shared Disk Problems," for more details.
This section addresses potential problems arising from the use of the
MA8000/EMA12000 Storage Subsystem as the shared storage device. This
section does not address storage subsystem problems that are specific to the
MA8000/EMA12000 Storage Subsystem itself or to the use of the storage
subsystem in a standalone server configuration. For detailed coverage of those
issues, refer to the Compaq StorageWorks documentation provided with the
MA8000/EMA12000 Storage Subsystem.
A problem with the Windows 2000 HAL (Hardware Abstraction Layer) may
prevent the KGPSA-BC Host Adapter device driver (LP6NDS35.SYS) from
initializing during system boot. The consequences of this problem are:
I
None of the shared storage subsystem devices connected to the affected
KGPSA-BC Host Adapter will be available.
I
The event log entry will be entered in the system event log. The generic
message "At least one service or driver failed during system setup" is
displayed.