Table 5-1 Controller Properties - Compaq 112726-001 - ProLiant - 6500 Administrator's Manual

5-28 Compaq Parallel Database Cluster Model PDC/O5000 for Oracle8i and Windows 2000 Administrator Guide
Description Values
General Allocation class: 0
SCSI version: SCSI-2
Host Ports Host Port 1 Requested Topology: Loop Hard
Host Port 1 Requested Port Address: (user defined)
Host Port 1 Actual Port Address: (user defined)
Host Port 2 Requested Topology: Loop Hard
Host Port 2 Requested Port Address: (user defined)
Host Port 2 Actual Port Address: (user defined)
Cache Cache flush time (seconds): 10
Respond to internal cache battery condition: selected
Communications Confirm that the screen is grayed out (disabled); if not, return to the
LUN "Disable Communication LUN" section.
Connections Operating System: Windows 2000
Unit Offset: 0 for Port 1
(Rename the default connection names to reflect your configuration.
For example, SVR1TOP1, for node 1, top controller, port 1. See
"Renaming the Default Connection Names" in this chapter.)
Battery Confirm that the battery is fully charged.
2. Repeat step 1 to verify controller properties for the second array
controller.
3. Click OK to close the Controller Properties window.
Renaming the Default Connection Names
Each KGPSA-BC or KGPSA-CB Host Adapter installed in a PDC/O5000
cluster node is automatically assigned a default connection name to identify its
connection to a port on an array controller. You must change these default
connection names to the format SVRnTOPn or SVRnBOTn required for
this PDC.
Table 5-1
Controller Properties