iFIT PRO-FORM CARBONE EL User Manual page 26

HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first unplug the power adapter.
Next, using
a standard
screwdriver,
carefully pry off
the left Disc (71).
See the inset drawing at the right. Locate the Reed
Switch (38). Turn the Pulley (19) until a Magnet (43) is
aligned with the Reed Switch.
Next, slightly loosen the indicated two M4 x 12mm
Flange Screws (50). Slide the Reed Switch (38) slightly
closer to or away from the Magnet (43), and then
retighten the Flange Screws.
71
50
38
43
19
Then, plug in the adapter and rock the Pulley (19) for-
ward and backward just enough that the Magnet (43)
passes the Reed Switch (38) repeatedly. Repeat these
actions until the console displays correct feedback.
When the reed switch is correctly adjusted, reattach
the left disc and plug in the power adapter.
26