Table of Contents
Advertisement
Available languages
Available languages
• Installation
• It maycausefailureof applianceor
performance deterioration.
CAUTION
• Otherwise,it may cause electric
shockand damage.
Safety
Precautions
• It is not designed to dehumidify
the entire house.
0
• Turning off the unit will save on
energy costs.
0
0
• Sharp edges may cause injury.
• For proper operation,your
dehumidifiershould be installed
only on a floor.
• The dehumidifier must be
operated in an enclosed area to
be most effective.
Owner's Manual
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 54351 - 35 Pint Dehumidifier and is the answer not in the manual?
Questions and answers
i want to collect water only in the bucket and not go to hole outlet is there a special way to change it
To set the Kenmore 54351 - 35 Pint Dehumidifier to collect water only in the bucket instead of the hose outlet, follow these steps:
1. Remove the drain hose if it is attached.
2. Ensure the drain hole cover is in place to block the hose outlet.
3. Make sure the water bucket is properly installed in its correct position.
The dehumidifier will then collect water in the bucket, and you will need to empty it manually when full.
This answer is automatically generated