Related Manuals for Kraus Indy FUS-14103
Summary of Contents for Kraus Indy FUS-14103
- Page 1 INSTALLATION MANUAL Indy Two Handle Widespread Basin Bathroom Faucet FUS-14103 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2024 Kraus USA Plumbing LLC I REV. July 29, 2024...
- Page 2 Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
-
Page 3: Prior To Installation
· Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. Read all instructions and safety warnings and ensure you have all tools, ·... - Page 4 Diagram and Parts List Faucet Body Three-Way Connector Hot Handle Overflow Cap Cold Handle Pop Up Drain Handle Mounting Hardware Waterlines Spout Mounting Hardware...
-
Page 5: Faucet Dimensions
Faucet Dimensions 13 3/8" (339.2mm) 8" (203.2mm) 2" 4 3/8" (50.8mm) (110.8mm) 1/2-14 NPSM-2A 2 5/8" (67.56mm) 20 1/2" (520mm) 5/8" Ø1 1/4" (31mm) (14.5mm) 1 1/4" (31.75mm) Installer Tip: Shut off main water supply before installing new faucet. - Page 6 Step 1. Install faucet and mounting bracket Shut off hot and cold water supplies. Remove the old faucet. Place the faucet body (A) through the center hole in the countertop or sink. Secure the faucet body (A) with the bracket (E) from underneath the countertop or sink by threading the nut up the pin until fully tightened.
- Page 7 Step 2. Install the handles Install the hot handle (B) through the left hole in the sink or countertop and secure it with the mounting hardware (D). Place the washer first, then the mounting nut. Secure with the mounting screws using a phillips head screwdriver. Repeat these steps for the cold handle (C) on the right side.
- Page 8 Step 3. Install the three-way connector Install the three-way connector (F) to the faucet body (A) hose and hot and cold handle (B & C) hoses by pushing up on each.
- Page 9 Step 4. Connect waterlines Attach waterlines (I) to the faucet. Then attach waterlines to angle stops, matching cold to cold and hot to hot. Tighten all connections until snug. Turn on angle stops and check for leaks. (DO NOT TURN FAUCET ON) NOTE: Make sure filter washers are installed.
- Page 10 Step 5. Install pop-up drain Remove head (1), nut, washer and black seal (2) from the body (3). [FIG. 1] Apply the rubber washer (3) to the underside of the flange (1). Then, insert the body (2) into the sink. [FIG. 2] Install the black seal (1) onto the threads on the body (2).
- Page 11 Step 7. Check for leaks/Flush faucet Turn on the hot and cold water supplies. Turn the water on for 1 minute to remove any debris. Check all connections for leaks. Retighten if necessary, but do not overtighten.
-
Page 12: Replacement Parts
Replacement Parts Replacement Parts List Finish/Color Part # CH, MB, SFBN, 1. Cold Handle KP65026 SFBB, SFBBMB, SFBNMB* CH, MB, SFBN, 2. Hot Handle KP65027 SFBB, SFBBMB, SFBNMB* 3. Cartridge KP65032 4. Aerator KP65033 5. Handle Mounting KP65024 Hardware KP65016 6. -
Page 13: Troubleshooting
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet Hot or cold cartridge may Remove the handle by hand by turning be loose. the handle base counterclockwise. - Page 14 Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
- Page 15 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com...
- Page 16 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...
Need help?
Do you have a question about the Indy FUS-14103 and is the answer not in the manual?
Questions and answers