Page 2
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
∅ 45mm) ∅ • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800- 1 15/16” ∅ 50mm) ∅ 775-0703 for a replacement •...
Page 4
Diagram and Parts List A. Faucet Body D. Hot & Cold Waterlines B. Base O-Ring (factory-installed) E. Adjustable Aerator C. Mounting Hardware: F. Aerator Key C1. Rubber U-Washer G. Hex Wrench C2. Metal U-Washer C3. Mounting Screw C4. Mounting Nut...
Page 6
Lift Rod Drain Diagram and Parts List and Dimensions a. Waste Stopper i. Top Hat Washer b. Drain j. Drain Off Pole c. Rubber Washer k. Washer d. Concave Washer l. Retaining Nut e. Plastic Washer m. Extender Rod n. Clip f.
Page 7
Step 1: Remove mounting hardware and install waterlines Remove faucet, mounting hardware, and waterlines from the box. Remove mounting nut (C4) from mounting screw (C3). Place faucet body (A) on a soft cloth, spout facing up. Secure hot & cold waterlines (D) at the base of the faucet (hand-tighten, then secure with ¼...
Step 3: Secure faucet ” - Install rubber U-washer (C1) and metal U-washer (C2) from underneath the countertop or sink. Attach mounting nut (C4) to mounting screw (C3) and tighten with adjustable wrench or 10mm wrench until snug Step 4: Connect waterlines to main valve Thread hot &...
Page 9
Step 5: Install Drain • Install drain (b), with rubber washer (c) attached, into the drain hole. Attach concave washer (d) with narrow end up, plastic washer (e), and mounting nut (f ) to drain (b) from underneath countertop or sink.
Page 10
Step 5: Install Drain • Insert lift pole rod (p) through the hole in the back of the faucet body. Loosen thumb screw (o) and attach extender rod (m) to lift pole rod (p). Tighten thumb screw (o) j k l •...
Page 11
Step6: Flush faucet Remove adjustable aerator (E) with aerator key (F). Turn water on for 1 minute to remove any debris. Reassemble aerator (E) and adjust to desired position Replacement Part List - FUS-1821 1. Metal Handle 2. Set Screw 3.
Page 12
Replacement Part List - Lift Rod Drain 1. Waste Stopper 2. Drain 3. Rubber Washer 4. Concave Washer 5. Plastic Washer 6. Mounting Nut 7. Tailpipe Washer 8. Tailpipe 9. Top Hat Washer 10. Drain Off Pole 11. Washer 12. Retaining Nut 13.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: P R O B L E M C A U S E A C T I O N Leakage under the handle Locking nut (7) has come Loosen set screw (2) with...
Page 14
(1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Page 15
Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Page 16
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...