Kraus FUS-1011 Installation Manual

Kraus FUS-1011 Installation Manual

Arcus single lever basin bathroom faucet

Advertisement

INSTALLATION GUIDE
Arcus Single Lever Basin
Bathroom Faucet
FUS-1011
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017

Advertisement

Table of Contents
loading

Summary of Contents for Kraus FUS-1011

  • Page 1 INSTALLATION GUIDE Arcus Single Lever Basin Bathroom Faucet FUS-1011 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017...
  • Page 2 Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
  • Page 3: Prior To Installation

    Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement • Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure •...
  • Page 4 Diagram and Parts List...
  • Page 5 Diagram and Parts List Tools you will need: 1. Faucet Body 2. Deck Plate Assembly (A) Deck Plate (B) Base Plate Adjustable Wrench 3. Mounting Hardware (A) Rubber Washer (B) Metal Washer (C) Mounting Nuts (D) Mounting Screws 4. Hot & Cold Waterlines 5.
  • Page 6 Dimensions 7 5/8” 7 5/8” 1 5/8” 1 5/8” (194mm) (194mm) 4 3/4” 4 3/4” (42mm) (42mm) (120mm) (120mm) º º 2 3/8” 2 3/8” 6 5/16” 6 5/16” (61mm) (61mm) (160mm) (160mm) Ø 2 1/8” Ø 2 1/8” W1/4”-20 W1/4”-20 (Ø54.7mm) (Ø54.7mm)
  • Page 7 step1 step2A step2B Step 1: Remove Mounting Hardware Remove mounting hardware from faucet (3A, B & C) step2A step3 step2B Step 2A: Installing the Faucet With Deck Plate For three-hole installation, step7 step5 deck plate (2A), base plate (2B), and silicone sealant are required step3 step2B...
  • Page 8 step3 Step 3: Install Faucet and Mounting Hardware step4 Insert faucet body (1) into the hole on the countertop or deck plate assembly (3). Install rubber washer (2A), metal washer (2B), and mounting nuts (2C) on mounting screws (2D) from underneath the countertop step4 Step 4: Secure Mounting Hardware...
  • Page 9: Step 6: Install Drain

    Step 5: Connect Waterlines to Main Valve step7 step5 Connect hot & cold waterlines (4) to the angle stops. Tighten with a wrench until snug. Turn on hot and cold angle stops and check for leaks NOTE: Make sure O-rings are installed at the end of the hot &...
  • Page 10 1. Place a bead of silicone 2. From underneath the around the drain opening. countertop, attach concave Insert drain body (9D), with washer (9F) and mounting nut rubber washer (9E) attached, (9G), and secure tightly to sink into the drain hole 3.
  • Page 11 tep2A step3 step2B 5. Insert lift pole rod (9A) 6. Align drain body (9D) to through the hole in the enable drain off pole (9H) back of the faucet body (1). and lift pole extension (9B) to From underneath, insert the engage.
  • Page 12: Replacement Parts

    Replacement Parts 1. (A) Index Button (B) Set Screw 2. Metal Handle 3. Cartridge Cover 4. Locking Nut 5. Cartridge 6. Aerator Assembly (A) Aerator Cover (B) Aerator (C) Washer 7. (A) Base Trim Ring (B) Base O-Ring 8. Mounting Hardware (A) Rubber Washer (B) Metal Washer (C) Mounting Nut...
  • Page 13: Troubleshooting

    Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: P R O B L E M C A U S E A C T I O N Leakage under the Locking nut (4) has Remove handle index...
  • Page 14 (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
  • Page 15 Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
  • Page 16 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...

Table of Contents