Dell CX4 Series User Manual page 47

Table 3-2. Storage Group Properties
Property
Unique ID
Storage group name
Connected hosts
Used host connection
paths
LUNs in storage group
Description
A unique identifier that is automatically assigned to the
storage group that cannot be changed.
The name of the storage group. The default storage
group name is formatted as Storage Group n, where n
equals the existing number of storage groups plus one.
Lists the host systems connected to the storage group.
Each host entry contains the following fields:
• Name — Name of the host system
• IP address — IP address of the host system
• OS — Operating system that is running on the host
system
NOTE:
In a clustered environment, all nodes of a cluster
must be connected to the same storage group.
An additional storage group feature that performs the
following tasks:
• Lists all of the paths from the host server to the storage
group
• Displays whether the path is enabled or disabled
Each path contains the following fields:
– HBA — Device name of the HBA in the host system
– HBA Port — Unique ID for the HBA port connected
to the storage system
– SP Port — Unique ID for the storage processor port
connected to the HBA port
– SP ID — ID of the storage processor
Lists the LUNs in the storage group.
Each LUN entry contains the following fields:
• Identifier — LUN icon representing the LUN
• Name — Name of the LUN
• Capacity — Amount of allocated storage space on the
LUN
Preparing Your Systems for Clustering
47