Dell CX4 Series User Manual page 30

Figure 2-10. Cabling a SAN-Attached Cluster to the Dell/EMC CX4-120 or CX4-240
cluster node 1
0 1
sw0
Cabling a SAN-Attached Cluster to the Dell/EMC CX4-480 or CX4-960 Storage
System
1 Connect cluster node 1 to the SAN:
Connect a cable from HBA port 0 to Fibre Channel switch 0 (sw0).
a
Connect a cable from HBA port 1 to Fibre Channel switch 1 (sw1).
b
2 Repeat step 1 for each additional cluster node.
3 Connect the storage system to the SAN:
Connect a cable from Fibre Channel switch 0 (sw0) to the first front-
a
end fibre channel port on SP-A.
Connect a cable from Fibre Channel switch 0 (sw0) to the first front-
b
end fibre channel port on SP-B.
Connect a cable from Fibre Channel switch 0 (sw0) to the second
c
front-end fibre channel port on SP-A.
30
Cabling Your Cluster Hardware
HBA ports (2)
SP-B
CX4-120 or CX4-240 storage system
cluster node 2
HBA ports (2)
SP-A
0 1
sw1