Cluster Storage - Dell CX4 Series User Manual

Cluster Storage

Table 1-2 lists supported storage systems and the configuration requirements
for the cluster nodes and stand-alone systems connected to the storage systems.
Table 1-2. Cluster Storage Requirements
Hardware Components Requirement
Supported storage
systems
Cluster nodes
Multiple clusters and
stand-alone systems
Table 1-3 lists hardware requirements for the storage processor enclosures (SPE),
disk array enclosures (DAE), and standby power supplies (SPS).
Table 1-3. Dell/EMC Storage System Requirements
Processor Minimum Storage
Enclosure
CX4-120 One DAE-OS with at
least five and up to 15
hard drives
CX4-240 One DAE-OS with at
least five and up to 15
hard drives
CX4-480 One DAE-OS with at
least five and up to 15
hard drives
CX4-960 One DAE-OS with at
least five and up to 15
hard drives
NOTE:
The DAE-OS is the first DAE enclosure that is connected to the CX4-series
(including all of the storage systems listed above). Core software is preinstalled on
the first five hard drives of the DAE-OS.
10
Introduction
One to four supported Dell/EMC storage systems. See
Table 1-3 for specific storage system requirements.
All nodes must be directly attached to a single storage system
or attached to one or more storage systems through a SAN.
Can share one or more supported storage systems. See
"Installing and Configuring the Shared Storage System" on
page 45.
Possible Storage
Expansion
Up to seven DAE's with
a maximum of 15 hard
drives each
Up to fifteen DAE's with
a maximum of 15 hard
drives each
Up to thirty one DAE's
with a maximum of 15
hard drives each
Up to sixty three DAE's
with a maximum of 15
hard drives each
SPS
Two for SPE and
DAE-OS
Two for SPE and
DAE-OS
Two for SPE and
DAE-OS
Two for SPE and
DAE-OS