Download Print this page

Exr-1 Robot Specifications; Worksite And Climate; Mobility Platform & Chargers - ExRobotics ExR-1 Operating Manual

Hide thumbs Also See for ExR-1:

Advertisement

10.

ExR-1 Robot Specifications

10.1.

Worksite and Climate

Description
Operating Temp.
Range
Equip. Protection
Level
Explosion Group
Temperature Class
Ingress Protection
Ground Conditions
Height Change
Corrosion & Erosion
Precipitation
Light conditions
10.2.
Mobility Platform & Chargers
Description
Maximum Robot
Width
Maximum Robot
Length
Maximum Robot
Height
Minimum Robot
Ground Clearance
Robot Weight
Speed
Turning Circle
Range
Mission Duration
Switches
Recovery
Maintenance
Markings
Docking station
ExRobotics B.V.
ExR-1 Robot
Operating Guide
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2020 ExRobotics B.V.
Specification
-20C to +50C
Gb (Zone 1)
IIB (ethylene)
T4 (maximum surface temperature 135C)
IP54 (dust protected, splashing water resistant)
Mixed hard surfaces, slabs, pebbles, metal gratings & grass.
Essentially level site with ledges up to 20 cm high and slopes up
to 30 degrees inclination.
Maritime conditions
All except deep snow.
Day (and night if optional lights are fitted)
Specification
690 mm
950 mm
560 mm including antennas
40 mm
Less than 100 kg.
Proportionally controllable speed up to 2.5 km/hour. Driver can
switch between fast and slow speed modes.
Spot steering around robot's central axis
Up to 2 km depending on accessory usage.
2 to 7 hours depending on the amount of driving
Power on/off and emergency stop mushroom
Robot to be lifted onto transport by 4 operators or using
appropriate lifting equipment.
Robot is provided with a 1 year warranty. If robot requires
maintenance customer to ship it to and from the nearest
ExRobotics maintenance facility. Extended warranties are
available
Each Robot has stickers affixed with:
- Regulatory Ex-certificate notation
- Hazard warnings
- Privacy caution.
When docked the robot charges its batteries autonomously. They
are fully recharged in 2 days. Customer to secure the docking
station to the ground and connect the junction box to a power
supply.
Document No.:
20190122IP1
Version No.: 11
Owner:
Date:
Ian Peerless
2020-03-31
Page 21 of 23

Advertisement

loading
Need help?

Need help?

Do you have a question about the ExR-1 and is the answer not in the manual?

Subscribe to Our Youtube Channel