Authorisation And Authentication; Robot Delivery - ExRobotics ExR-1 Operating Manual

7.2.

Authorisation and Authentication

Customers will appoint a Fleet Manager(s) that controls access to robots. He/she will allocate
the following roles to individuals:
Drivers control robots.
▪
Viewers access the data streams and mission reports from robots.
▪
Fleet Managers will control access with the "User Management" screen (see below) which is
accessed from the User Menu (see Section 5.1 ).
When a new user is registered they will receive an E-Mail that will prompt them to set their
password before full access is granted. It's then possible to connect to robots by visiting this
address using Google Chrome: https://login.energy-robotics.com.
7.3.

Robot Delivery

Robots should be charged using a docking station (or the quick charger if fitted) immediately
after delivery because the battery will slowly lose power. Then as soon as practical the customer
should:
1. Verify that the robot connects to the control station(s).
2. Test the emergency stop.
3. Check the tension in the tracks (see Section 8.4).
4. Check that the robot stops when the 4G signal is lost.
5. Calibrate the gas sensors (if fitted).
6. Ensure that the robot is fully operational and can be accessed from the relevant control
station(s).
ExRobotics B.V.
ExR-1 Robot
Operating Guide
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2020 ExRobotics B.V.
Document No.: Owner:
20190122IP1
Version No.: 11 Ian Peerless
Date:
2020-03-31 Page 14 of 23