Dash MultiMaker Max Cooking System Manual page 21

ISSUE
When using the
MultiMaker , the
™
Cover gets very hot.
Is this normal?
After using the
MultiMaker a few times,
™
food is starting to stick
to the surface.
What is happening?
The Indicator Light
will not turn on and
the Removable Plates
are failing to heat.
Troubleshooting
SOLUTION
Yes, this is completely normal. When using
the MultiMaker ™ , always lift and lower the
Cover by the Cover Handle. To prevent
personal injury, DO NOT lift the Cover with
your arm positioned over the Removable
Plates. They are hot and may cause injury.
There is probably a build-up of burnt food
residue on the Removable Plates. This is
normal, especially when cooking with sugar.
Allow the appliance to cool fully. Then, use a
damp, soapy cloth to wipe down the Plates.
Thoroughly rinse the cloth and wipe again.
If any food remains, apply a small amount of
cooking oil and let sit for 5-10 minutes. Then
scrub with a sponge or soft-bristled brush to
dislodge food.
1.
Ensure that the power cord is plugged into
the power outlet.
2.
Check to make sure the power outlet is
operating correctly.
3.
Determine if a power failure has occurred
in your home, apartment
or building.
∙ 21 ∙