Advertisement
Quick Links
Advertisement
Related Manuals for Dash MANDOLINE
Summary of Contents for Dash MANDOLINE
- Page 1 ELECTRIC MANDOLINE quickstart guide DEM001H_20190228_QUICKSTARTGUIDE_v2.indd 1 3/20/19 10:50 AM...
-
Page 2: Cutting Guide
Wavy cutting guide cutting guide * The blade numbers in the quickstart guide may not correspond to your model of Electric Mandoline. When handling Blades and Inserts, be very careful as their blades are E3-C Refer to the numbers below and in page 7 of the manual for blade numbers for your model. - Page 3 Disk. For detailed instruction, refer to pg.10 of the Instruction Manual. NOTE: This notch will be in a different place each time you stop the Mandoline. Pay careful attention to make sure that the tab is inserted into the notch and not in front of or behind Removing the notch.
- Page 4 Blades are very sharp and may cause injury. Be extremely careful while DO NOT hold the Lid by the side opposite the careful while assembling, disassembling, and cleaning the assembling, disassembling, and cleaning the Electric Mandoline. Power Button while removing the Lid as this may cause Electric Mandoline.
- Page 5 cleaning your blades & inserts Separate Blade Insert from Blade Disk. If using the Julienne/Slicer Disk, lift the Insert up and then slide it out. If using the Cube/Large Cube/Wavy Disk, simply slide Insert out and remove any remaining food with the Cube Insert Cleaner.
Need help?
Do you have a question about the MANDOLINE and is the answer not in the manual?
Questions and answers