Getinge MAQUET CARDIOHELP Instructions For Use Manual page 11

5 Set the upper part of the mast to the desired height and release
the plastic ring.
6 Make sure that the upper part of the mast has engaged.
4.4 Attaching the Mobile Holder to a Stretcher
You can attach the mobile holder to a stretcher using the two lockable hooks.
WARNING!
Ensure that by attaching the mobile holder the permissible load of the stretcher is not exceeded. Please
take the weight of the loaded mobile holder into account (⇨ "Accessories for Intra-Hospital Patient
Transport", page 12).
An unfastened mobile holder can be knocked out of the hooks by vibrations or impacts. Make sure that
both hooks are properly attached to the stretcher and securely locked.
1 To open the locking mechanism of the hook, press the locking
button and press the lever upward.
▶ If you push the lever all the way up, the lock engages and
remains open.
2 Attach the mobile holder to the stretcher with both hooks.
3 Press on the locking button, to close the lock again.
▶ The hook is locked.
4 Make sure that both hooks are properly attached to the stretcher and securely locked.
5 Cleaning and Disinfection After Every Use
Clean the stainless steel and aluminum surfaces using liquid household cleaner and remove all dirt such as
splashes of blood or other soiling.
You can use the following disinfectants:
n Isopropyl alcohol (70% vol.)
n Buraton rapid (Schülke & Mayr)
| Accessories for Patient Transport | 5 Cleaning and Disinfection After Every Use
Instructions for Use | 2.2 | en | 06
Copyright Maquet Cardiopulmonary GmbH
| 11 |
en