Inkbird INK-IFT03 GR Instruction Manual page 5

Cautions
Infrared thermometer should be protected in the following:
– EMF (electro-magnetic fields) from arc welders, induction heaters.
– Thermal shock (caused by large or abrupt ambient temperature changes,
please wait 20 to 30 minutes for the thermometer to reach a stable state
before use).
– Do not leave the unit on or near objects of high temperature.
Maintenance
1. Lens cleaning: Use the clean compressed air to blow off loose particles, use
the soft brush to remove the debris away, at last clean it with wet cotton cloth.
2. Case cleaning: Clean the case with a damp sponge/cloth and mild soap.
NOTE
1. Do not use solvent to clean the lens.
2. Do not submerge the unit in water.
- 4 -