Inkbird INK-IFT03 GR Instruction Manual page 2

Specifications
Product category
Accuracy
Response time
Emissivity
Distance to spot ratio
℃/℉ Selection
Backlight display selection
Dual laser targeting
Function selection
Operating environment
Storage temperature
Operating temperature
Power/Power life
Warning
Do not point laser directly or indirectly(through reflective
surfaces) at someone's eye.
Operation Instructions
How to turn on the infrared thermometer?
Install batteries, then press the measurement button, the
thermometer will be turned on automatically and displays the
measured temperature.
How to turn off the infrared thermometer?
The thermometer will be turned off automatically 15 seconds
later if no operation is performed on it.
How to measure an object with the infrared
thermometer?
Aim the target, press the measure button to perform a single
measurement, or hold the measure button to perform
continuous measurement.
Note: Please hold the measure button for at least 0.5 seconds
while measuring the temperature of an object.
Distance Spot Ratio
The farther the target is, the larger the measuring point
(measurement area) of the thermometer is. The relationship
between the distance and the measuring point is usually
Infrared Thermometer
≥100℃, ±2％ / ≤100℃, ±2℃
. 0.5s
Adjustable , 0.1 to 1.0
16 : 1
√
√
√
High/Low temperature alarm setup
MAX/MIN/AVG/DIF temperature measurement
Temperature: 0℃~50℃
Relative humidity: 10~95%RH
-20~50℃ (-4~122℉)
0~50℃ (32~122℉)
9V / about 12 hours
- 1 -