BLINDS2GO SmartView Electric Pleated Blinds Installation Manual page 3

Installation Guide
Cordless / SmartView Electric Pleated Blinds
Fitting the blind
Model shown is a Cordless Pleated Blind with SmartView Electric upgrade
Situate the front lip of the headrail into Push the back of the headrail upwards
the front hook of the bracket. to engage the metal clip at the back of
the bracket.
To remove the blind from the brackets, insert a flat head screwdriver into the tab protruding from the bottom of the rail, then gently
pry it back while tilting the back of the rail downwards. Repeat this carefully for each bracket to release the rail.
Page 3 of 4