Advertisement
Table of Contents
Installation Guide
Roman Blinds
Fitting the brackets
Standard finish
The brackets offer two methods of installation:
Top-Fixing
Face-Fixing
Cassette finish
These brackets also offer two methods of installation:
Top fixing
Face fixing
For both finishes, note that the position of the outermost
5cm
5cm
brackets should be at least 5cm away from the ends of the rail,
with any other brackets evenly distributed across the width.
Advertisement
Table of Contents
Related Manuals for BLINDS2GO Dandelion
Summary of Contents for BLINDS2GO Dandelion
- Page 1 Installation Guide Roman Blinds Fitting the brackets Standard finish The brackets offer two methods of installation: Top-Fixing Face-Fixing Cassette finish These brackets also offer two methods of installation: Top fixing Face fixing For both finishes, note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly distributed across the width.
- Page 2 Installation Guide Roman Blinds Fitting the blind Standard finish Situate the front lip of the headrail into Push the back of the headrail upwards the front of the bracket. to lock it into the back of the bracket. Cassette finish To fit the cassette into the bracket, hold the cassette at an Now raise the back of the cassette up and push up firmly into angle and locate the central ‘lip’...
- Page 3 Installation Guide Roman Blinds Child Safety Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become The cord retaining device must be installed at the maximum distance possible wrapped around a child’s from the control mechanism to prevent looped cords from becoming slack.
Need help?
Do you have a question about the Dandelion and is the answer not in the manual?
Questions and answers