Advertisement
Quick Links
Assembling the frame
Unpack the blind and frame (the side and bottom frames are packed separately in the same box), then lay out all the parts and push
the control chain to one side so it doesn't get tangled.
Before you slot the frames together,
clip the corner cover pieces onto the
corner joints so that they're firmly
attached.
Guide the side runners on the ends of
the blind's bottom bar into the
channels on the inside of the side
frames.
Attach the side frames to the top
and bottom by inserting the pegs on
each corner section into their
corresponding channels in the
frames.
Installation Guide
PerfectFIT Roller Blinds
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BLINDS2GO PerfectFIT
Summary of Contents for BLINDS2GO PerfectFIT
- Page 1 Installation Guide PerfectFIT Roller Blinds Assembling the frame Unpack the blind and frame (the side and bottom frames are packed separately in the same box), then lay out all the parts and push the control chain to one side so it doesn’t get tangled.
- Page 2 Installation Guide PerfectFIT Roller Blinds Securing the operating chain Peel the sticky pad (packed with the brackets) from its plastic sheet and stick it Keeping the chain taut, press the chain runner firmly to the back of the chain runner. Peel the cover from the back of the sticky pad.
Need help?
Do you have a question about the PerfectFIT and is the answer not in the manual?
Questions and answers