Advertisement
Quick Links
Fitting the brackets
There are two types of brackets for vertical blinds, each of which offers a different method of installation:
Use the single hole in the top of the bracket to fix to
the lintel (the 'ceiling' of the recess).
5cm
7.5cm
Top-Fixing
If you're using top-fix brackets, make sure that you mount them at least 7.5cm in front of either
the window frame, or any protruding vents or handes, if there are any. This allows space for the
louvres to turn open and closed.
We've made a handy video version of this fitting guide, just
click the play button to view it.
If you prefer to print the instructions or simply to follow
step-by-step, just keep reading.
Use two screws through the back plate to mount
onto a facing surface (a wall or window frame)
Note that the position of the outermost brackets should be
5cm
at least 5cm away from the ends of the rail, with any other
brackets evenly distributed across the width.
For safety reasons, always ensure that the top of
the blind is installed at least 150cm (1500mm)
from the floor.
Installation Guide
Vertical Blinds
Face-Fixing
Advertisement
Related Manuals for BLINDS2GO City
Summary of Contents for BLINDS2GO City
- Page 1 Installation Guide Vertical Blinds We’ve made a handy video version of this fitting guide, just click the play button to view it. If you prefer to print the instructions or simply to follow step-by-step, just keep reading. Fitting the brackets There are two types of brackets for vertical blinds, each of which offers a different method of installation: Top-Fixing Face-Fixing...
- Page 2 Installation Guide Vertical Blinds Fitting the blind Top-Fixing Face-Fixing Situate the front lip of the headrail into the front of the Situate the back lip of the headrail into the back hook of bracket. the bracket. Lift the back of the headrail and push up firmly to secure Lift the front of the headrail so it’s level, then tighten the the back of the rail into the bracket.
- Page 3 Installation Guide Vertical Blinds Hook the louvres onto the rail. Slide the weights into the pockets at the bottom of the louvres.
- Page 4 Installation Guide Vertical Blinds Child Safety Cord Tensioner Your vertical blind is fully compliant with the latest safety standards. It has been supplied with a ‘P-Clip’ tensioning device to keep the cords and the chain child safe. Slot both the cord and the beaded chain into the ‘P-Clip’ and secure it to the wall or window frame (if you are fixing to the facing surface then the cord and chain will form a figure of eight, this is fine and will not affect the operation of your blind).
Need help?
Do you have a question about the City and is the answer not in the manual?
Questions and answers