Advertisement
Table of Contents
Fitting a Twist2Go Roller Blind
Insert the blind into the recess at an angle and push the
tightener against the wall.
Make adjustments to the position of the blind so that it is straight and level, before locking it in place.
Right Control
Tightener on the left
Top Tip
Make sure that you tighten the wheel as much as you possibly can so that the blind remains secure and does not slip.
We've made a handy video version of this section too!
Again, if you prefer to print the instructions or simply to
follow step-by-step, just keep reading.
Lift the control end of the blind until level and release
For smaller blinds:
Left Control
Tightener on the right
For safety reasons, always
ensure that the top of the
blind is installed at least
150cm (1500mm) from the
floor.
Installation Guide
Twist2Go Roller Blinds
pressure, the blind will hold itself in place.
Hold the blind securely in place and turn the
tightening wheel to tighten the blind in place.
Turn the wheel clockwise relative to the roller tube.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BLINDS2GO Twist2Go
Summary of Contents for BLINDS2GO Twist2Go
- Page 1 Installation Guide Twist2Go Roller Blinds Fitting a Twist2Go Roller Blind We’ve made a handy video version of this section too! Again, if you prefer to print the instructions or simply to follow step-by-step, just keep reading. Insert the blind into the recess at an angle and push the Lift the control end of the blind until level and release tightener against the wall.
- Page 2 Installation Guide Twist2Go Roller Blinds For larger blinds: Hold the blind securely in place and turn the tightening wheel to tighten the blind in place. Right Control Left Control Turn the wheel clockwise relative to the roller tube. Tightener on the left...
Need help?
Do you have a question about the Twist2Go and is the answer not in the manual?
Questions and answers
the twist2go blind I received is about 5mm too short for the width of the window bay is there anyway to extend it further ?
No, the BLINDS2GO Twist2Go blind cannot be extended if it is too short for the window bay. Additionally, it is not suitable for use in bay windows.
This answer is automatically generated