Subscribe to Our Youtube Channel
Related Manuals for Moxa Technologies V1200 Series
Summary of Contents for Moxa Technologies V1200 Series
- Page 1 V1200 Series Hardware User’s Manual Version 1.0, February 2025 www.moxa.com/products © 2025 Moxa Inc. All rights reserved.
-
Page 2: Copyright Notice
V1200 Series Hardware User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice © 2025 Moxa Inc. All rights reserved. Trademarks The MOXA logo is a registered trademark of Moxa Inc. -
Page 3: Table Of Contents
Table of Contents Introduction ............................4 Package Checklist ..........................4 Product Features ........................... 4 Product Specifications ..........................4 Hardware Introduction ......................... 5 Appearance ............................5 V1202-CT-T ........................... 5 V1222-CT-T ........................... 5 V1222-W-CT-T ..........................6 Dimensions ............................6 Wall Mounting (default) ........................6 Desk Mounting (optional) ........................ -
Page 4: Introduction
EN50155 OT4 requirements and are suitable for wide-temperature applications. Package Checklist Before installing a V1200 computer, verify that the package contains the following items: 1 x V1200 Series computer • 1 x Wall-mounting kit • 1 x Quick installation guide (printed) •... -
Page 5: Hardware Introduction
The multiple installation options allow you to find the most suitable installation method for your site and ensure the correct installation of computer. Appearance V1202-CT-T V1222-CT-T V1200 Series Hardware User’s Manual... -
Page 6: V1222-W-Ct-T
V1222-W-CT-T Dimensions Wall Mounting (default) V1200 Series Hardware User’s Manual... -
Page 7: Desk Mounting (Optional)
Desk Mounting (optional) DIN-rail Mounting (optional) V1200 Series Hardware User’s Manual... -
Page 8: Led Indicators
Ensure that the USB port is covered with the rubber cap if it is not in use. The V1200 Series can be mounted on to a DIN rail, a wall, or installed on a desk. The wall-mounting kit is included in the product package by default. If you want to use another mounting method, you will need to order the optional DIN-rail mounting or desk-mounting kits separately. -
Page 9: Desk Mounting (Optional)
Head Type: Pan/Doom Head Diameter 5.2 mm < OD < 7.0 mm Length > 6 mm Thread Size: M3 x 0.5P Recommended Fastening Torque: 4.5 ± 0.5 kgf-cm V1200 Series Hardware User’s Manual... -
Page 10: Din-Rail Mounting (Optional)
Fasten the five M3 x 4 mm screws in the mounting-kit package to secure the bracket to the computer with a torque value of 4.5±0.5 kgf-cm. To mount the V1200 Series on to a DIN rail, ensure that the stiff metal spring is facing upwards and follow these steps. -
Page 11: Hardware Connection Description
If the current goes above the maximum ratings, the wiring could overheat, causing serious damage to your equipment. Temperature Caution! Be careful when handling the unit. When the unit is plugged in, the internal components generate heat, and consequently the outer casing may feel hot to the touch. V1200 Series Hardware User’s Manual... -
Page 12: Connecting The Power
ATTENTION This product is intended to be mounted to a well-grounded mounting surface such as a metal panel. Use the green-and-yellow cable type minimum with American Wire Gauge (AWG) 14 (2.5 mm ) for grounding. V1200 Series Hardware User’s Manual... -
Page 13: Connecting The Network
Connecting a USB Device The USB port, located on the front panel, is a type-A USB 2.0 console port which you can use to connect a USB storage device or a type-A USB compatible device. V1200 Series Hardware User’s Manual... -
Page 14: Connecting Serial Ports
Remove the screw securing the SIM card holder Remove the SIM card tray by pressing the tray inwards cover on the front panel of the computer. and releasing it to eject the tray, then pulling out the tray. V1200 Series Hardware User’s Manual... -
Page 15: Inserting A Microsd Card
The console port is an RS-232 port located on the lower part of the front panel. To install the card, remove the screw and the protection cover to access the console port. Connect a 4-pin pin header cable and use the port for debugging issues or system image upgrades. Signal V1200 Series Hardware User’s Manual... -
Page 16: Regulatory Approval Statements
This device and its antenna must not be co-located or operating with any other antenna or transmitter. WARNING This is a class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. V1200 Series Hardware User’s Manual...
Need help?
Do you have a question about the V1200 Series and is the answer not in the manual?
Questions and answers