SolaX Power AELIO-P50B200 Installation Manual page 8

• Operators must wear PPE while installation and maintenance of the device.
• During operation, avoid touching any parts of the inverter other than the DC switch
and LCD panel.
• Never connect or disconnect the AC and DC connector while the inverter is running.
• Prior to conducting any maintenance, turn off the AC and DC power and disconnect
them from the inverter. Wait for 15 minutes to fully discharge the energy.
• Avoid touching the inverter while it is running, as it becomes hot during operation
and may cause personal injuries.
• Please wear PPE, such as, protective clothing, insulating shoes, goggles, safety
helmets, insulating gloves, etc., when conducting electrical wiring.
• Do not touch the power supply equipment directly, or through conductors or damp
objects.
• Do not touch the parts of the equipment of which warning signs are attached, to
avoid personal injury or device damage.
• Do not use a straight ladder. When electrical work is involved, a wooden ladder or an
insulated ladder shall be used.
• The equipment shall not be used to provide a backup power source in the following
circumstances:
a. Equipment related to life;
b. Sensitive precision instruments;
c. Home appliances will be faulty in the case of a power failure during operation.
• Make sure that children are supervised to prevent them from playing with the inverter.
• Pay attention to the weight of the inverter and handle it properly to avoid personal
injuries.
• Do not power on the device until it has been installed and confirmed by professionals.
• In the event of a fire, evacuate immediately and call the local fire services.
• The signs and messages on the labels and nameplates attached to the device need to
be visible and clear.
WARNING!
WARNING!
CAUTION!
CAUTION!
CAUTION!
NOTICE!
5