THORLABS OCTP Series User Manual page 6

OCTP Series Scanner
Introduction
Chapter 2
2.1. Safety
Please read this manual carefully before operating the OCTP. Please also read any manuals for the systems
being connected to the OCTP.
All statements regarding safety and technical specifications will only apply when the unit is operated correctly.
This equipment is intended for laboratory use only and is not certified for medical applications,
There are sensitive electronic and optical parts in the OCTP.
Any modification or servicing of this system by unqualified personnel renders Thorlabs free of
Any modification of the galvanometer scanners or the camera may cause loss of the factory
This device can only be returned for service when it is packed into the complete original
packaging, including all foam packing inserts. Please contact Thorlabs' support for replacement
When a light source (e.g. SLD, laser) is being coupled into the OCTP, please observe the
appropriate laser safety precautions for your own protection. The appropriate laser safety
precautions depend on the light source coupled into the OCTP.
During normal operations, laser light will be present within the scanner and will also be emitted
from the scanner. Laser light may also be emitted from unexpected locations, such as if the fiber
has been disconnected from the body or if the reference arm has been disconnected.
In addition, the OCTP is an optical system that can influence the divergence of the beam. This
can cause a change of laser class of the light source, especially if the OCTP is used without an
Always turn off the light source before changing or adjusting the OCTP configuration or
accessories as the objective, scan lens kit, or sample z-spacer. For Thorlabs OCT base units,
turn off the OCT base unit main power to turn off the light source.
Page 2
ATTENTION
including, but not limited to, life support situations.
WARRANTY WARNING
any liability.
optical alignment.
packaging if the original packaging has been lost.
LASER RADIATION WARNING
objective.
Chapter 2: Introduction
MTN003971-D02