Advertisement
OCTP Series Scanner
Chapter 4: Installation
Installation
Chapter 4
Figure 16 OCTP
Figure 17 OCTP-PS
The OCTP(-PS) scanner is a preassembled, integral accessory to an OCT base unit. It should be securely
mounted to an optical table or breadboard with minimal vibrations. We recommend mounting the OCTP(-PS) in
a Thorlabs OCT-STAND. The OCTP-PS is composed of a linear stage instead of the lens tube system used in
the OCTP. Hence, adjustments of the reference length are possible. In addition, it consists of two quarter-wave
plates in the sample arm and the reference arm to adjust the polarization state.
Page 16
MTN003971-D02
Advertisement
Need help?
Do you have a question about the OCTP Series and is the answer not in the manual?
Questions and answers