Advertisement
OCTP Series Scanner
Chapter 3: Components and Compatibility
3.1.7. OCT-STAND
The OCT-STAND is a dedicated stand for OCTP scanners. The OCTP scanners are attached to the focus block
of the OCT-STAND using a spring-loaded mount accepting the dovetail mount of the OCTP. The focus block
can be rotated 360° around the Ø1.5" rod, and features 30 mm of travel with fine and coarse adjustment knobs.
Figure 12 OCTP in Thorlabs OCT-STAND
Page 12
MTN003971-D02
Advertisement
Need help?
Do you have a question about the OCTP Series and is the answer not in the manual?
Questions and answers